|◀ 1 - 12 of 2373 ▶|
View:

The Model EXA-1000 Omni-directional Remote Antenna is designed to enhance the radio range of Linears receivers. This antenna can be connected to the F connector on many Linear receivers to improve their range when they must be located in poor signal reception locations. Usually an increase of 20-30% range can be expected. The versatile EXA-1000 can be mounted in a variety of ways. A 2-inch U-bolt is supplied for post or pipe mounting, or the U-bolt holes in the Base Plate can be used to screw the antenna to a wall or vertical wood brace or beam.

NOTE: Generally, the higher the antenna is mounted above ground level, the better the radio range will be.

The EXA-1000 is a 1/2 wave, center fed, vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot, 75-ohm coaxial cable. The cable connects to the antenna base on one end and the receivers F connector on the other. If the antenna must be mounted further than five feet from the receiver, an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied. Because of the cable resistance, the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable.

Features

  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
  • Omni-directional remote antenna
  • Includes 5 feet of coax
  • U-bolt for post mounting
  • Dimensions: 3 W x 19.5 H x 6 D in.
  • Order number: AAE00198
Item#:
EXA-1000
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Users/Fingerprints: 5000 Event Buffer:10,000 Reader
  • Ports:4 (Support multi format Weigand or OSDP Readers)
  • Communication: TCP/IP/Wifi and RS485 for FP and OSDP Readers
  • Input Ports: 9 (4 exit buttons, 4 door sensors, 1 Aux Input)
  • Output Ports: 5 (4 FORM-C Relay Output for lock and 1 Aux Output Relay)
  • Gross Weight: 3 lbs.
  • Package Size: 12" x 9" x 4"
Item#:
ATLAS460
You must be logged in to order this item. Log in here

Includes

  • CA4500B ACU board
  • 1-OCB8 relay board
  • 1-DPS-15 power supply
  • 1-black metal enclosure with lock and tamper switch


Features
  • Network TCP/IP ready
  • Easily configurable reader settings supporting many Wiegand protocols
  • Auto-transfer protocol uploads transaction buffer if interruption occurs
  • Dual processors
  • Lock down and global communication among multiple ACUs, server and sites (requires CIMs and CIM Link)
  • Multiple inputs and outputs for expansion capability

Item#:
CA4500
You must be logged in to order this item. Log in here
Hikvision's DS-KH8350-WTE1 Video Intercom Indoor Station features an 8.6 mm ultra-slim design, and a colorful 7" capacitive touch screen. It was a winner of the 2017 Reddot Award. The indoor station can be combined with other Hikvision products and used to set up security solutions with varying levels of sophistication.
  • Premium Tempered Glass
  • Aerospace-Grade Aluminum
  • New UI v2.0: User-Friendly Aluminum
  • 7" Colorful IPS Capacitive Touch Screen with 1024 x 600 Resolution
  • 8.6 mm Ultra-Slim Design
  • Reddot 2017 Award Winner
  • Standard PoE
  • Support Capture While Video Calling
  • Remote Unlocking via Client Software or Mobile Client
  • Views Live Videos of Door Stations and External Cameras
Item#:
DS-KH8350-WTE1
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Full online and offline operation
  • Supports for 30,000 active credentials, 30,000 PIN codes, 128 access groups, 128 access areas, 128 time zones, 64 holidays and 32 NG Smart Links for automation
  • 20,000 nonvolatile, FIFO, records the event log while offline
  • Expandable with MD-IO84B I/O expansion for additional 8 inputs, 4 outputs OR the MD-D02B 2-Reader expansion for additional 2 readers with 4 inputs, 4 outputs
  • Real-time clock with super-cap holds power and keeps RTC real-time clock for up to 2 weeks when total power loss (no batteries to replace)
  • Supports wide range of Wiegand reader formats, PIN keypad formats, and logic options to support wide range of locks, deadbolts, electric strikes, maglocks, and sliding doors
Item#:
AC-425IP-BU
You must be logged in to order this item. Log in here
  • A package of Atlas260 in Metal Cabinet with Power Supply
  • UL294 and CAN/ULC-S319 Certification Pending
  • Gross Weight: 12 lbs.
  • Package Size: 15 1/2" x 13 1/2" x 5"
Item#:
ATLAS260 BUN
You must be logged in to order this item. Log in here

Include legacy license, CU-500, and battery

Item#:
DNET-500-UPKIT
You must be logged in to order this item. Log in here
4" x 6" fold-and-clip secure visitor paper badges. Can be used in ink and laser color printers. Print black/white or color badges. 1,000 badges per pack.
Item#:
LWVMSCVB
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 2373 ▶|
View:
(Denotes required field.)