S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
Actions- Water, high and low temp sensing
- Fast Install "Just toss in"
- Multiple applications
- IP67 waterproof
- 10 year nominal battery life
- Titanium probes for unmatched corrosion immunity
- IP67 rated waterproof enclosure
- GORE vent to prevent seal failure
- 5-year warranty
- Tri-Mode Environmental Sensing:
- Flood, high and low temp
- Freeze - for Furnace Failure - Under 45 degrees F
- Overheat - for Furnace runaway or Air Conditioning failure - Over 100 Degrees F
- 3 unique wireless IDs or Loops: one for each function
- Cover and wall tamper
- 3-5x more range than competing "puck" style sensors.
- 8-10 year battery life on CR2032 battery.
- IP67 waterproof rating
- 2.43 x 2.48 x 1.17 inches
The EnviroAlert EA-200 critical-environment monitoring device provides visibility to 2 environmental factors: ambient temperature and an additional factor of temperature, humidity or water presence. In addition to the local (on device) visual and audible notifications, when integrated to a security panel the system allows for the real-time notification of an incident and immediate corrective action.
Features:
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- 6' cord
- Water "bug" can be fastened to the floor to the wall
- Reports water presence to IQ Panel
- Get e-mail or text alerts if there is water detected
- Sensor: 2.5"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air. Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
- (2) -Panasonic CR2032 -Energizer CR2032 -Duracell DL2032
- Tri-Mode environmental sensing:
- Flood, high and low temp
- Freeze – for furnace failure – Under 45 degrees F
- Overheat – for furnace runaway or air conditioning failure – Over 100 Degrees F
- 3 unique wireless IDs or Loops: one for each function
- Cover and wall tamper.
- 3-5x more range than competing "puck" style sensors.
- 8-10 year battery life on CR2032 battery.
- IP67 waterproof rating
- 2.43 x 2.48 x 1.17 inches
- Visible signal quality shown on the device
- Fully supervised
- 6 foot wire water probe
- Visible and transmitted low battery indication
- Prolonged battery life (8 years with typical use)
- Dimensions: 81 x 34 x 25mm (3.19 x 1.25 x 1in)
- Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
The EnviroAlert EA-400 critical-environment monitoring device provides visibility of up to 4 environmental factors including temperature, humidity and water detection. When a condition deviates from the predetermined threshold both visual and audible notifications occur. When integrated into a security panel, the system allows for the real-time notification of an incident and immediate corrective action.
Features:
2GIG Encrypted Water Leak Detector provides timely notification before costly water damage and flooding happens. Water damage is the #1 residential insurance claim
Features
The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.
Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.
Features:
Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.