• Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
• Mounted next to door
• Momentarily pressing the button releases door for 30 seconds
• Retriggerable
• Single Gang or Narrow Stile
• SPST 3 Amp wet N/C contacts
• Operates on 12 or 24 VDC (must be same voltage as the installed lock)
• For indoor use only
• Includes switchable green, red and blue ADA lenses
• UL Listed

• Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
• Mounted next to door
• Momentarily pressing the button releases door for 30 seconds
• Retriggerable
• Single Gang or Narrow Stile
• SPST 3 Amp wet N/C contacts
• Operates on 12 or 24 VDC (must be same voltage as the installed lock)
• For indoor use only
• EEB3N includes switchable green and red lenses
• UL Listed

• 18 in. long armored door loop
• .250 I.D. steel jacket resists abrasion and damage
• White and brown end caps match all door frames
• Mounting hardware included
• Custom lengths available

The DS160 Series consists of the DS160 Detector (light gray) and the DS161 Detector (black) specifically designed for Request-to-exit (REX) applications. With features such as timers, door monitor with sounder alert, and pointable coverage, the DS160 and DS161 have the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device.

Features

• Door monitor with sounder alert
• Sequential Logic Input (SLI)
• Internal vertical pointability
• Wrap-around coverage pattern with precise pattern control
• Up to 64 second adjustable latch time
• Selectable relay trigger mode
• Selectable fail-safe or fail-secure modes
• Adjustable sounder volume
• Activation LED

• Single or double door use
• Wall or ceiling mountable
• Internal vertical pointability
• Wrap-around coverage pattern
• Selectable relay trigger mode

ENFORCER SD-9163-KSQ "No Touch" Request-To-Exit Plates use IR technology to request egress from a protected area or to activate a device with the simple wave of a hand. Since they require no touch, these plates are ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

• Weather-resistant (IP65) for outdoor use
• Clean and simple no-touch operation reduces the risk of cross-contamination
• Adjustable sensor range up to 7" (18cm)
• Stainless-steel plate, available in slimline or single-gang
• 1A relay, adjustable trigger duration 0.5~20 seconds
• Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated