|◀ 1 - 12 of 397 ▶|
View:
The Qolsys QS7134-840 IQ Hardwire 16-F w/ Large Enclosure is a wired to wireless system converter that transmits signals at the 319.5 MHz frequency. By using this module, you can bring over your existing hardwired sensors and use them with your 319.5 MHz wireless security system.

The way that the Qolsys IQ Hardwire 16-F works is very simple. It has 16 on-board zone terminal pairs for connecting hardwired sensors. Each zone features its own LED light to assist with enrollment and troubleshooting. A resistor must be used at each zone. In Legacy Mode, the QS7134-840 can be calibrated to use 1k to 10k resistors that are wired in parallel (NO) or series (NC). This differs from the older-style QS7133-840 that was restricted to only supporting 4.7k resistors (Yellow-Violet-Black-Brown-Brown). However, all versions of the Qolsys IQ Hardwire 16-F come with the same 4.7k resistors that must be used to meet UL Standards for fire protection. These resistors work great, so it is advised that you just use the included ones to avoid any possible confusion.

For primary power, the Qolsys IQ Hardwire 16-F uses its included 16VDC transformer. This transformer features an attached power cable for connecting with the module. On the cable, the wire with the grey dashes is the positive (+) connector. The unmarked wire represents the negative (-) connector. If you damage the transformer or the attached cable, then you will need to get a replacement 16VDC transformer.
Item#:
QS7134-840
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Full online and offline operation
  • Supports for 30,000 active credentials, 30,000 PIN codes, 128 access groups, 128 access areas, 128 time zones, 64 holidays and 32 NG Smart Links for automation
  • 20,000 nonvolatile, FIFO, records the event log while offline
  • Expandable with MD-IO84B I/O expansion for additional 8 inputs, 4 outputs OR the MD-D02B 2-Reader expansion for additional 2 readers with 4 inputs, 4 outputs
  • Real-time clock with super-cap holds power and keeps RTC real-time clock for up to 2 weeks when total power loss (no batteries to replace)
  • Supports wide range of Wiegand reader formats, PIN keypad formats, and logic options to support wide range of locks, deadbolts, electric strikes, maglocks, and sliding doors
Item#:
AC-425IP-BU
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • A package of Atlas260 in Metal Cabinet with Power Supply
  • UL294 and CAN/ULC-S319 Certification Pending
  • Gross Weight: 12 lbs.
  • Package Size: 15 1/2" x 13 1/2" x 5"
Item#:
ATLAS260 BUN
You must be logged in to order this item. Log in here

Hikvision’s DS-K260x-G series Access Controller is supplied with the latest structure TCP/IP and RS-485 communication interface. Communication data is encrypted to improve system security. The controller also supports offline operation and is designed with a tamper-proof switch.
  • TCP/IP, RS-485
  • Storage for up to 100,000 (can be expended to 200,000) cards
  • 4 card readers (RS-485 Interface, Hikvision only); 4 card readers (Wiegand Interface, W26/34 Reader, or custom Wiegand via iVMS-4200 configuration)
  • RS-485 and Wiegand Access Card Reader Interface
  • -40° to 60° F (-40° C to 140° C)
  • Working Humidity: 10% to 90%
  • 17.7" x 15.7" x 3.7" (450 mm x 400 mm x 93.7 mm)
Item#:
DS-K2604-G
You must be logged in to order this item. Log in here

Includes

  • EC2500B ACU board
  • 2-OCB8 relay boards
  • 1-DPS-15 power supply
  • 1-black metal enclosure with lock and tamper switch


Features
  • Network TCP/IP ready
  • Easily configurable reader settings supporting many Wiegand protocols
  • Auto-transfer protocol uploads transaction buffer if interruption occurs
  • Dual processors
  • Lock down and global communication among multiple ACUs, server and sites (requires CIMs and CIM Link)
  • Multiple inputs and outputs for expansion capability

Item#:
EC2500
You must be logged in to order this item. Log in here

Includes

  • CA8500B ACU board
  • 2-OCB8 relay boards
  • 1-DPS-15 power supply
  • 1-black metal enclosure with lock and tamper switch


Features
  • Network TCP/IP ready
  • Easily configurable reader settings supporting many Wiegand protocols
  • Auto-transfer protocol uploads transaction buffer if interruption occurs
  • Dual processors
  • Lock down and global communication among multiple ACUs, server and sites (requires CIMs and CIM Link)
  • Multiple inputs and outputs for expansion capability

Item#:
CA8500
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Full online and offline operation
  • Supports for 30,000 active credentials + 30,000 PIN codes, 128 access groups, 128 access areas, 128-time zones, 64 holidays and 32 NG Smart Links for automation
  • 20,000 non-volatile, FIFO, records the event log while offline
  • Real-time clock with super-cap keeps time for up to 2 weeks when total power loss (no batteries to replace)
  • Supports a wide range of Rosslare and third-party readers with a wide range of Wiegand reader formats and PIN keypad formats
  • Supports a large variety of locking hardware with built-in logic options to support a wide range of lock strikes, deadbolts, electric strikes, maglocks, and handle locks (Fail Safe, Fail Secure)
Item#:
AC-215IP-BU
You must be logged in to order this item. Log in here

KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass Security Software and is a highly secure solution for any security-conscious business. KT-400 can easily be integrated into an existing EntraPass system with other Kantech controllers (KT-1 and KT-300), or basic door security without the need to connect to a host system when in Standalone Mode  providing the foundation for a brand new security installation.

With an onboard Ethernet port, an external IP device isn't required to connect to the network. The onboard port is dual-sensing, which means the system senses whether the connection is 10Base-T or 100Base-T and adjusts automatically for faster connectivity. KT-400 manages network polling and communicates with the EntraPass Gateway only when an event has occurred. Communication integrity is ensured through a heartbeat signal which is sent at regular intervals to the EntraPass system. This asynchronous communication significantly reduces the amount of bandwidth required to manage the access control system over the network.

Features

  • Configure and manage four doors using a simple embedded web browser  no software to purchase and install (Standalone Mode, KT-400rev1)
  • Intuitive configuration wizard for quick set up (Standalone Mode, KT-400rev1)
  • Onboard Ethernet 128-bit AES-encrypted communication with the EntraPass system ensures a high degree of network security
  • 100,000 cards capacity and provides up to 20,000 concurrent events in stand-alone mode
  • 256 outputs (four onboard) provide scalability
  • Communicates with the EntraPass Gateway only when an event has occurred, ensuring low network bandwidth consumption (Special and Corporate Editions only)
  • Verify and configure IP settings with a built-in web configuration page
  • Supervised door lock outputs with internal or external power supply
  • LEDs provide important controller status and diagnostic information
  • Additional battery supervision and monitoring help ensure controller functionality
  • Compatible with EntraPass Security Management Software v6.02 or higher

Item#:
KT-400
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 397 ▶|
View:
(Denotes required field.)