S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The DS1103i Detector uses microprocessor-based sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1103i can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The rectangular enclosure mounts flush on ceilings or walls.
Features:
The IQ Glass is specially designed to protect you if an intruder tries to break-in through a window. Using our proprietary S-Line encryption technology, encrypts signals sent to the IQ Panel while still providing backwards compatibility for legacy 319.5 systems. Triggered by the pitch and frequency of breaking glass, the IQ Glass is effective within 25 ft. and is activated automatically when you arm your IQ Panel in either "Stay" or "Away" mode. Typically installed on the opposite wall or on the ceiling to allow for better "listening" ability in large living areas.
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Actively listening for breaking glass frequencies when you are in "stay" or "away" modes
- Typically installed on the wall opposite the windows needing protection, or on the ceiling in a room with windows on multiple sides
- Protects widows within line of sight within 25 ft.
The DS1100i Detector Series uses microprocessorbased sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1101i can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The round detectors mount on the ceiling or walls.
Features:
- FlexCoreTM Signal Processor - The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard ® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
- V-Plex Polling Loop Technology - V-Plex devices are installed using two wires for power and data. In addition, V-Plex technology features Point Identification, allowing users to quickly pinpoint the source of an alarm or trouble condition.
- Easy Installation and Setup - Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG1625SN has a centered wire entry hole, 45° terminal blocks, and EOL terminals. A hand-clap feature verifies that the detector is functioning.
- Selectable Sensitivity - Two dip switches on the FG1625SN make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG-701 Glassbreak Simulator.
- Mount the Detector Anywhere - Mounts on any wall, in the window frame, or on the ceiling, with no minimum range and a maximum range of 25’ (7.6 m) to the glass.
- Covers All Glass Types - The FG1625SN works on all glass types, including plate, tempered, laminated, wired, film-coated, and sealed insulating glass.
- Multiple Domain Signal Analysis - The FG1625SN performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.
- Enclosed PC Board - The PCB is protected from potential damage during installation.
- Patented Remote Test Mode - The Patented Remote Test Mode can enable or disable the indicator LEDs using the FG-701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes.
- Mounting Locations - The FG1625SN can be mounted on the ceiling, opposite wall, adjoining wall, or the same wall as the glass.
The GEM-GB is an advanced wireless acoustic glass-break detector for use with all Gemini-Series control panels and receivers. Each transmitter has a unique RF ID code (printed on the sensor module and on the rear case) that distinguishes itself to the receiver. Refer to control-panel instructions for entering this code and its checksum digit into the panel. Be sure to enter all numbers and/or letters, including leading zeros, if any. The detector is powered by two type DL123A 3-volt lithium batteries, which are factory installed. To energize the unit, simply install the supplied Power-Up Jumper across pins JP1 near the positive terminals of the batteries.
Features:
Housing Dimensions 4.1 x 2.3 x 1.0 inches (10.6 x 6.0 x 2.6 centimeters)
Weight with Battery 2.75 ounces (78 grams)
Mounting Fasteners #6 screws, anchors, VHB tape (all provided)
Environmental
Operating temperature 32°F to 120°F (0°C to 49°C)
Maximum humidity 85% non-condensing relative humidity
Device Specifications
Frequency 433.92 MHz
Replacement Battery One Panasonic® CR123A
Nominal Battery Life 3.5 years
Battery Voltage 3.0 VDC (Nominal), 2.2 VDC (Low)
Current Draw 30 mA (Maximum), 50 uA (Quiescent)
Transmitted Indications Low Battery, Tamper, Supervision, Alarm
Certification RE629 FCC, IC
Features:
- Sensor detects the sound of breaking glass.
- Strong, reliable RF signal.
- 4-6 year battery life on CR123A battery.
- Low Battery, Tamper, Supervision, Alarm.
Specifications:
- Sensing parameters: Maximum 25 feet
- Mounting Spec: At least 3.3 feet from windows being protected, and 4 feet from sources of noise
- Mounting hardware: #6 screws, anchors, VHB tape (all provided)
- Replacement Battery: CR123A 1550mAH
- Temperature Range: 14 to 120 degrees Farenheit
- Housing dimensions: 4.1 x 2.3 x 1.0 inches (10.6 x 6.0 x 2.6 centimeters)
Smart enough to distinguish the sound of breaking glass from other common sounds found in homes and businesses, the detectors feature high-performance microphones and advanced microprocessor-based Digital Sound Analysis (DSA) that can determine all types of breaking framed glass (plate, float, tempered, wired and laminated) up to 25 feet away. Acuity glassbreak detectors can be mounted on walls or ceilings.
Features:
With this exceptionally smart detector, you get immediate notification of a broken window orglass door. Its unique detection capabilities deliver unprecedented dependability, identifying sounds that other detectors might miss without the hassle of false alarms.
This added layer of advanced security for the exterior of your home or business lets you take quick action to protect your property, prevent damage to contents, and avoid unnecessary costs.
- Proprietary microphone technology constantly listens to sounds and analyzes patterns
- Smart data analysis captures only real broken window/glass door events
- Complex classification process, utilizing high-power processing, minimizes false alarms
Features:
- Glass break detection of plate, tempered, laminated and wired glass
- Detection rage up to 20ft (6m)
- Visible link quality indication shown on the device
- Acoustic Pattern Recognition Technology provides 360° coverage
- Visible and transmitted low battery indication
The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.
Features:
Breaking a window is one of the easiest and most common ways for an intruder to enter a home or business. To help protect against this type of intrusion, a WLS922L-433 Glassbreak Detector is indispensable.
Smart enough to distinguish the sound of breaking glass from other common sounds found in homes and businesses, the detector features high-performance microphone using Dynamic Signal Processing and can determine all types of breaking framed glass (plate, float, tempered, wired and laminated). Moreover, the WLS922L-433 is provided with an installerselectable Dip Switch with 2 different levels of detection that allow optimising false alarm immunity for certain acoustic environments. All these features make WLS922L-433 Glassbreak Detector a highly reliable and must-have security constituent for your home and business.
Features:
S2K Administration - Form Template Display
Actions