The PG9945 is designed to communicate with the security system to report openings and closings of doors & windows. Known for its versatility and reliability, the PG9945 is an easy to install device ideal for a wide range of environments.

The PG9945 PowerG Door/Window Contact is equipped with a visible link quality LED indicator on the contact that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad. Additionally, device configuration is quick and easy with no hardware switches or need to re-open devices. All device configuration settings are handled on the system keypad.

Features:

• Selectable operation of auxiliary input as NO, NC or EOL supervision
• Visible link quality indicator shown on device
• Case and wall tamper
• Available in either white (PG9945) or brown (PG9945BR) to blend into any décor
• User-selectable operation of auxiliary input as NC or EOL
• Prolonged battery life (8 years with typical use)
• Back tamper switch options
• Dimensions: 81 x 32 x 25mm (3.19 x 1.25 x 1in)
• Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard

The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.

Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.

Features:

• Detects standing water that reaches the sensor probe and notifies the panel
• Sends trouble alert to the panel when the ambient temperature exceeds 84 deg. F
• Sends trouble alert to the panel when the ambient temperature falls below 42 deg. F
• Ships with long life lithium battery life (typical battery life of 5 years)
• ETL listed
• Requires Firmware Version 1.14 or later for GC2 panel and 3.1 or later for GC3

The PG9901 Wireless PowerG Indoor Siren is a fully supervised, cost effective siren that provides differentiated audible and visual alerts in the case of fire, carbon monoxide, burglary and flood events. In addition to providing a loud audible alert, the PG9901 also contains a built-in high-power white strobe light providing a visual alert of the event.
With its sleek and modern design, the PG9901 will fit most internal spaces.
Features:

• Visible link quality indicator on device
• 110dB Siren with Strobe Light
• Differentiated audible alerts for intrusion and fire
• Prolonged battery life (8 years with typical use)
• Dimensions: 161 x 161 x 50mm (6.44 x 6.44 x 1.75in)

• For sensing things that open or separate
• 3 total zones. Each with separate ESNs
• Main reed switch + magnet
• 2 supplemental hardwire zones
• Outer terminal
• Inner terminal
• Cover tamper
• Strong, reliable RF signal
• 10-15 year battery life on CR123A battery
• Low Battery indication

The IQ Siren is the perfect way to make your alarm even LOUDER when the alarm goes off. Completely wireless it plugs into any standard outlet and even includes 3 LED lights that strobe during alarm events. Acting as a Z-Wave repeater, it strengthens and improves your smarthome network improving the performance of all your devices.
Features:

• Plugs into any standard outlet
• 3 LEDs strobe during alarm events
• Clean, discreet look
• 3 hour backup battery
• Acts as Z-Wave repeater to strengthen your home network

• Transmits power at the full FCC limits, maximizing range
• Support for an external contact
• 1-inch magnet gap
• cover tamper
• 6+ year battery life