S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The PG9911 is a fully supervised Wireless PowerG Outdoor Siren, designed for installation in areas in which wiring is difficult or impossible. The PG9911 is a self-powered wireless outdoor siren that provides the perfect security solution for home owners looking for an external siren that is both affordable and easy to install. The PG9911 combines form and function to provide improved protection against intruders, before they get the chance to enter the home.
Since the PG9911 is wireless, it can conveniently be installed innumerous locations outside the home. With fewer holes to drill and reduced installation time, an installer can quickly move on to another installation.The PG9911 Wireless PowerG Outdoor Siren is equipped with a visible signal quality LED indicator that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad.
Additionally, device configuration is quick and easy with no hardware switches or need to re-open devices. All device configuration settings are handled on the keypad with no need to re-open the device once installed.
Differentiated audible and visual alerts are emitted in the case of Fire, Carbon Monoxide, Burglary and Flood events, ensuring that no alert goes unnoticed. In addition to providing a loud audible alert, the PG9911 also contains a built-in high-power strobe light providing a visual alert of the event.
Features
- 110db Siren Output
- Strobe light functionality for visual indication
- Sleek design and robust weatherproof housing (IP55)
- Fully supervised
- Prolonged battery life (8 years with typical use)
- Differentiated alarm sounds for intrusion, fire, gas and flood
- Large print screen area for customizable logos
- Dimensions: 295 x 186 x 63mm (11.63 x 7.31 x 2.5in)
Item#:
PG9911B BATT
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
The PowerG Wireless Smoke and Heat Detector provides early warning of fire. It alerts occupants of the room by activating the built-in 85db alarm buzzer and flashing LED light when smoke or temperature exceeding 57°C (135°F) are detected. At the same time, it transmits a coded signal to the control panel to activate the system siren, alerting the end user and/or central monitoring station to send onsite assistance.
- Provides accurate early fire warning, with audio and visual alerts, when smoke or high temperature is detected
- Enhances safety and facilitates maintenance, with alerts for device tampering and low battery
- Robust industry leading PowerG commercial grade wireless technology
- Offers long-lasting value with a 3-year battery life (with typical use)
- Large transmission range enables repeater-free installations
- Speeds up installations with visible link quality indicator on the device
- Simple wall or ceiling installation, with bracket
- Protected by a back tamper
Item#:
PG9936
You must be logged in to order this item.
Log in here
The ELK-319HRR is a Supervised, Wireless Heat Sensor. It uses a solid-state thermistor to sample and trigger an event at a selectable setpoint of either 135 or 200 degrees F. It can also trigger an event if the temperature rises 12 degrees F or more during a one (1) minute time period.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
- Ideal for garages, kitchens, attics, utility closets, etc.
- Long range and battery life
- Transmits alarm, tamper, low battery, and supervisory signals
- Powered by a single CR123 battery
- RF frequency: 319.5 MHz
- Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
- Battery type: One (1) 3VDC lithium battery
- Dimensions: 2.29" Dia. x 1.28" H (58.25mm x 32.4mm)
Item#:
319HRR
You must be logged in to order this item.
Log in here
The ELK-319DG is a Supervised, Wireless Sensor uniquely designed for outdoor use on swing gates or doors. The sensor and magnet can be mounted using screws (included), pipe strap style clamps, or plastic wire ties.
This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
- All weather design
- Ideal for pool areas and other outdoor gated spaces
- Long range and battery life
- Transmits open/close, tamper, low battery, and supervisory signals
- Uses easy to find CR2032 batteries
- RF frequency: 319.5 MHz
- Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Operating Temp Range: -40 to 140°F (-40 to 60°C)
- Dimensions: Sensor 3.39" L x 1.34" W x 0.79" D, Magnet 2.36" L x 0.83" W x 0.8" D
Item#:
319DG
You must be logged in to order this item.
Log in here
A bulky home security system can be an eyesore. Adding to that stress is hard wire installation permanently altering the aesthetics of a room, door or window treatment. With its wireless connectivity and fully concealed platform, however, the Ion Security Plunger is a door security sensor that finally eliminates these pesky inconveniences.
Features:
Item#:
PLUNGER-2GIG
You must be logged in to order this item.
Log in here
The IQ Siren is the perfect way to make your alarm even LOUDER when the alarm goes off. Completely wireless it plugs into any standard outlet and even includes 3 LED lights that strobe during alarm events. Acting as a Z-Wave repeater, it strengthens and improves your smarthome network improving the performance of all your devices.
Features:
- Plugs into any standard outlet
- 3 LEDs strobe during alarm events
- Clean, discreet look
- 3 hour backup battery
- Acts as Z-Wave repeater to strengthen your home network
- Built-in Lithium Battery: 430 mAh
- Alarm Power: 1.7W
- Max Standby Power: 0.7W
- Max Volume: 105dB
- Operating Temperature: 0°C to 45°C
- Operating Distance: Up to 550 feet outdoors
- Frequency Type: Z-Wave Plus
Item#:
QZ2300-840
You must be logged in to order this item.
Log in here
The ELK-319DWM is a Supervised, Wireless Door Sensor that detects the opening and closing of doors or windows.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
- Small, low profile design
- Long range and battery life
- Transmits open/close, tamper, low battery, and supervisory signals
- Uses easy to find CR2032 batteries
- RF frequency: 319.5 MHz
- Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Operating Temp Range: 32 to 120°F (0 to 49°C)
- Dimensions 2.25" L x .1.0 x 0.50" in. (L x W x D)
Item#:
319DWM
You must be logged in to order this item.
Log in here
- Transmits power at the full FCC limits, maximizing range
- Support for an external contact
- 1-inch magnet gap
- cover tamper
- 6+ year battery life
Item#:
RE222T
You must be logged in to order this item.
Log in here
Features:
- Sensor detects the sound of breaking glass.
- Strong, reliable RF signal.
- 4-6 year battery life on CR123A battery.
- Low Battery, Tamper, Supervision, Alarm.
Specifications:
- Sensing parameters: Maximum 25 feet
- Mounting Spec: At least 3.3 feet from windows being protected, and 4 feet from sources of noise
- Mounting hardware: #6 screws, anchors, VHB tape (all provided)
- Replacement Battery: CR123A 1550mAH
- Temperature Range: 14 to 120 degrees Farenheit
- Housing dimensions: 4.1 x 2.3 x 1.0 inches (10.6 x 6.0 x 2.6 centimeters)
Item#:
RE229
You must be logged in to order this item.
Log in here
The PG9939 Wireless PowerG 4-button key combines straightforward security system management with the added confidence of portable personal protection. The compact key lets users easily arm/disarm the system a or, if needed, call for help, when in close proximity to, or inside, a premise.
The PG9939 Wireless PowerG 4-Button Key provides both visual and audible verification of the successful execution of any requested commands. The dual confirmation that the message has been executed by the security system offers peace of mind to users.
The PG9939 is equipped with a full three-second activation delay on its panic function to help reduce false alarms, thus minimizing costly false dispatches caused by accidental activations. Additionally, the other keys incorporate a one-second delay to minimize false activations.
Features:
- 4 programmable function keys
- Visual and audible indicator to acknowledge requested action
- Full 3-seconds delay on panic function to reduce false alarms
Item#:
PG9939
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)