|◀ ◀ 313 - 324 of 364 ▶ ▶|
View:

SGL GANG OVERSIZED WP 2 PORT W H

Item#:
WP3302-WH
You must be logged in to order this item. Log in here

3/8'' X 6'' SPADE BIT

Item#:
SPA3/8-6
You must be logged in to order this item. Log in here

PREMADE 50 FOOT CBL RG59 BNC WITH 12V PWR CONNECTORS WHITE

Item#:
PEAKZ2050
You must be logged in to order this item. Log in here

150: Strike Latch Guard

Installed at the edge of the door to cover the lock and electric strike.

  • Stainless steel
  • Available in 626 finish only

Item#:
10270051
You must be logged in to order this item. Log in here

Universal BNC 2 Pc Crimp-On -- Male -- 50 Ohm, RG59 PVC & RG

Item#:
350-00TP
You must be logged in to order this item. Log in here

2-Wire Horn/Strobe, Ceiling Mount, High Candela, Red

The SpectrAlert Advance PC2RH is a red, two-wire, ceiling-mount horn strobe with selectable high-candela strobe settings of 135, 150, 177 and 185 cd.

Item#:
PC2RH
You must be logged in to order this item. Log in here

Keystone Midi Plate 1 Port, Bl ack, UL

Item#:
20-3011-BK
You must be logged in to order this item. Log in here

GC3 Transceiver Image Sensor Adapter

To enable the Image2 on a GC3 panel, the new Image Sensor Adapter ( 2GIG-XCVR3-GC3) is required to be installed, as well as Firmware version 3.0.1 or newer.

Item#:
2GIG-XCVR3-GC3
You must be logged in to order this item. Log in here

USB 2.0, Type-A Male to Type-A Male, 480 Mbps, 1 m (3 ft.),

Item#:
353892
You must be logged in to order this item. Log in here

Color Mini Dome Indoor, 600TVL, 2.8-12mm, 3 Axis, Low Illumination

  • 600TVL Image Resolution
  • 2.8-12mm Manual Zoom Lens
  • 12VDC Voltage
  • 1/3 in. SHARP CCD Image Sensor
  • 150mA Power Consumption
  • AGC & Auto White Balance
  • 14 - 122F (-10 - 50C) Operating Temperature

Item#:
PEAKCMD600A12812
You must be logged in to order this item. Log in here

FP: 503-630 5200 SERIES STRIKES

Item#:
10200031
You must be logged in to order this item. Log in here

Power Distribution to 9 Devices (250mA ea)

This item has been discontinued and replaced by item 
These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a single Master Power On/Off Switch. The modules accept a 6 to 30 Volt A.C. or D.C. power source (not included) which connects either to the input terminal block or the 2.1mm D.C. power jack located on the module. Two or more outputs can be paralleled for additional current.
  • Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
  • Master Power On/Off Switch.
  • Visual LED Power Indicators on each Output.
  • Convenient Test Points for measuring Total Current Draw.
  • Lifetime Limited Warranty.
  • Paintable White Plastic
  • Max Current Draw: 250mA from each output.
  • Max Combined Current Draw: Not to exceed Input Power Source
  • Input/Output Voltage: 6 to 30 Volts AC or DC
  • Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack
  • Output Connection: Screw terminals (POS and NEG) for each output
  • Enclosure Size: 6.5" x 4.3" x 2"
Item#:
PD9
You must be logged in to order this item. Log in here
|◀ ◀ 313 - 324 of 364 ▶ ▶|
View:
(Denotes required field.)