The MultiMag series of electromagnetic locks are designed for easy installation and multi-purpose operation for interior or perimeter doors. The mounting bracket has keyhole mounting to support the magnet, freeing the installer's hands to affix the magnet mounting screws. The removable cavity cover offers quick, easy access to wiring. The RCI 8310 MultiMag® applies to single outswinging doors, while the RCI 8320 MultiMag® is for double outswinging doors. For additional security monitoring these electromagnetic locks offer optional door status & security condition sensors.

• Energy: 230mA Auto-Sensing 12-24VDC (Max at 12VDC for 8310, 460mA for 8320)
• Strength: Up to 1,200lbf Holding Force (Each Electromagnet)
• Warranty: Lifetime Limited Warranty
• Mode: Fail-Safe
• Fire-Rated: CAN/ULC S104 UL 10C 1-1/2-Hours
• Monitoring: Optional Door Status Sensor (DSS)/ Security Condition Sensor (SCS) Available

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings. The ELK-950 is compact and easy to install and features high quality, clearly labeled screw terminals, 8 pin modular phone connector, built-in tamper loop, and automatic shorting pins for cord removal.

• Superior Solid State Surge Suppression
• Rapid Response Time
• Protects Incoming Telephone Line
• Protects AC Input from Transformer
• Clamps Line-To-Line & Line-To-Ground
• Self-restoring After Surges Within Ratings
• RJ31/38X 8-Pin Modular Jacks
• Convenient Test points for Lineman's Test set
• Surface Mount Enclosure
• Screw Terminals Provided For Telco In-Out & AC Power
• Lifetime Limited Warranty
• Response Time: Less than 1 Nanosecond
• Breakover Voltage: 300 Volts on Telephone Line, 50 Volts on AC line
• Peak Pulse Current: 100 Amps
• Max AC Input Voltage: 24VAC
• Ground Wire: 24" - 14 Gauge Stranded
• FCC Reg. No. 5K6USA-23140-XP-N Ren No. 0.0B
• Size: 4.4" x 3" x 1.15"

SLC loop:

• Low standby current
• Compatible with 400 Series product
• Two visible LEDs blink in standby and provide a 360° field viewing angle
• Detector head plugs easily into base
• Built-in test switch
• Wide variety of mounting bases with built-in shorting spring