|◀ 25 - 36 of 828 ▶|
View:
Item#:
BATCR123ASINGLE
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

eBridge100STR is a versatile solution Ethernet adapter/media converter kit which transmits data at 100Mbps full duplex and power over Coax cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They provide a simple way to replace legacy analog products with new IP devices over existing coax.

Item#:
EBRIDGE100STR
You must be logged in to order this item. Log in here

DITEK's DTK-1F is a single outlet surge protector that provides AC power protection for alarm panel transformers and point of use appliances.

  • Single AC outlet protects critical equipment
  • Center screw secures to outlet and can also secure a connected transformer
  • Diagnostic LED indicates AC power, ground presence and suppressor function

Item#:
DTK-1F
You must be logged in to order this item. Log in here

The DTK-2MHLP24BWB provides surge protection for two 24V alarm system loop circuits in a field-replaceable module. Includes hardwired mounting base for easy installation.

  • Protect two 24V pairs per module
  • Multi-stage SAD technology provides the best possible protection
  • Field-replaceable modules with hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground

Item#:
DTK-2MHLP24BWB
You must be logged in to order this item. Log in here
  • 48 Volt, 160 Watt power adapter
  • Reliable performance
  • Compatible with TI-PG541
  • AC-DC adapter
  • Input: 100 - 240 V AC, 50/60 Hz, 2.0 A
  • Output: 48 V, 3.34 A, 160 W (max.)
  • Operating temperature: -30 ~ +70 °C
Item#:
48VDC3000
You must be logged in to order this item. Log in here
TRENDnet's high efficiency 120 W Single Output Industrial DIN-Rail Power Supply, model TI-S12048 (Mean Well SDR-120-48), supplies up to 120 Watts (48 V, 2.5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.
  • Industrial power supply with integrated DIN-rail mount
  • Provides up to 120 Watts of power (48 V, 2.5 A)
  • Built-in active PFC (PF > 0.93)
  • Short circuit/overload/over voltage/over temperature protection
  • High efficiency (91%) design
  • UL 508 approved
  • 100 % full load burn-in test
  • Extreme -25 to 70 °C (-13 to 158 °F) operating temperature range
Item#:
TI-S12048
You must be logged in to order this item. Log in here
TRENDnet's high efficiency 240 W Single Output Industrial DIN-Rail Power Supply, model TI-S24048 (Mean Well SDR-240-48), supplies up to 240 Watts (48 V, 5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.
  • Industrial power supply with integrated DIN-rail mount
  • Provides up to 240 Watts of power (48 V, 5 A)
  • Built-in active PFC (PF > 0.93)
  • Short circuit/overload/over voltage/over temperature protection
  • High efficiency (94%) design
  • UL 508 approved
  • 100 % full load burn-in test
  • Extreme -25 to 70 °C (-13 to 158 °F) operating temperature range
Item#:
TI-S24048
You must be logged in to order this item. Log in here

Altronix WayPoint3 DC Outdoor Power Supply/Charger provides 12VDC or 24VDC and is designed to be conveniently located where power is required. Lightweight molded fiberglass reinforced polyester enclosure is NEMA 4/4X, IP66-11 Rated for outdoor use and accommodates up to two (2) 12VDC/7AH batteries. It features lockable stainless steel latches and integral flanges to simplify wall or pole mounting.

  • AC and DC power LED indicators.
  • Ease of installation saves time and eliminates costly labor.
  • Includes battery leads

Item#:
WAYPOINT3
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 25 - 36 of 828 ▶|
View:
(Denotes required field.)