S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsThe ELK-SP30 is an interior multi-purposesurface mount speaker great for voice and sounds.
Features:
- Pre-Wired For Quick And Easy Installation
- Compact, Easy To Mount, Hardware Included
- Heavy duty magnet, Mylar cone
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 20 Watts Nominal
- Frequency Response: 250 to 8000 Hz
- Size: 4.25 in. x 4.25 in. x 2.13 in.(108mm x 108mm x 54mm)
- Color: White
The ELK-110 Voice "Talking" Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features three input channels (1 for Burglar, 1 for Fire, and 1 for Carbon Monoxide), bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.
Includes:
- ELK-110 Siren Driver
- Wiring Harness
- Double Sided Foam Mounting Tape
- Instructions
- Installer Friendly - Compact & Easy to Mount
- Three Input Channels, Burglar, Fire, and Carbon Monoxide
- Bilingual Voice - English and or Spanish, Siren Only, Speech Only, or Combined
- MilliMiser Lowers Current Draw
- ComboTrigger For Single Outputs
- VolumeStep Slowly Increases Siren Volume
- Temporal 3 Coded Fire Signal
- Temporal 4 Coded CO Signal
- Lifetime Limited Warranty
- Operating Voltage: 10 to 14 Volts DC
- Current Draw: 1.25 Amps, (800 mA on MilliMiser setting), with one 8 Ohm speaker
- Sound Level: 122 db @ 1 meter, 14 vdc, with one 8 Ohm speaker
- Max. Speaker Load: 4 Ohms
- Size: 2.75in x 4.0in (70mm x 102mm)
The SSX-52 is a durable indoor/outdoor self-contained siren. The full featured siren consists of a single tone that delivers a warble sound output, 120dB output siren driver, and a dual action reed plunger for cover and rear protection. The SSX-52 is provided with a strong polycarbonate housing and a sturdy aluminum back plate to prevent warping and cracking. The SSX-52 comes completely assembled and ready for installation.
The SSX-52 excels in noisy areas such as warehouses, loading docks, print shops, busy production floors, or for indoor/outdoor applications where high quality and high output warning is required.
Features:
- Multifunction alarm, helps prevent unauthorized exits/entries
- Beeps and flashes when activated
- Add warning in second language with provided labels (20 languages)
- 95 or 105 dB alarm
- Set alarm length: 30 sec., 3 min., continuous (can also use as an annunciator)
- Easy to install
- Mount on top, right, left or next to almost any door
- Low battery warning (9-VDC alkaline battery included)
- Should not be exposed to water, for indoor use
- CE Approved, FCC & IC Compliant
- 5.375 in H x 5.375 in W x 2 in D
The ELK-150RT is a self-contained siren in a tamper and corrosion resistant stainless steel enclosure. It features two sealed reed tamper switches, one on the back plate and one on the front cover. The switches are normally closed and pre-wired in series. The ELK-150RT can produce two distinct sounds from a single input trigger. The stainless steel exterior reflects the color of the mounting surface allowing the ELK-150RT to blend easily with any residential or commercial building.
The ComboTrigger option allows controls which have a single alarm output and pulsing option to activate both the burglar and fire alarm sounds.
Features:
- Installer Friendly - Easy to Mount - Exterior / Interior use
- Sealed Reed Tamper Switches at single bolt closure and at rear of cabinet
- Corrosion resistant stainless steel construction
- Compact - Less Noticeable
- Loud - Rivals Sound of Larger Speakers
- Heavy Duty 1.8 lb Magnet
- ComboTrigger For Single Outputs
- Pre-Wired For Easy Installation
- Operating Voltage: 6 to 14 Volts DC
- Current Draw: 1.2 Amps
- Sound Level: 118 db @ 1 meter, 14 vdc
- Enclosure: #304 Stainless Steel with Stainless Hardware Included
- Size: 5 H x 5 W x 4 inch D
- Lifetime Limited Warranty
- 30 Watt Horn Speaker
- Attached Mounting Bracket
- High Fidelity Voice Coil
- Pre-Wired For Easy Installation
- Ideal for Alarm Systems or Paging
- Interior or Exterior use
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 30 Watts Nominal
- Frequency Response: 500 to 7000 Hz
- Size: 6 x 8 x 9.5 inches
- Color: White
The ELK-100 Siren Driver is a great choice for residential and commercial security installations. It draws less current than most siren drivers, and offers two volume levels (example: one indoor, the other outdoor) simultaneously. Our exclusive MilliMiser option allows further reduction of current draw for controls that have limited alarm or auxiliary output power. The ELK-100 has two inputs, Yelp & Steady. The Steady sound overrides the Yelp. The Yelp input has our unique ComboTrigger feature, especially designed for controls that have a single alarm output with a pulsing option for fire or burglary. When pulsed, this channel produces a distinctive third sound pattern.
Includes:
- ELK-100 Siren Driver
- Double Sided Foam Mounting Tape
- Instructions
- Two Volume Levels Simultaneously
- Draws Less Current Than Most Sirens
- MilliMiser Lowers Current Draw
- Economical - Drives Multiple Speakers
- ComboTrigger For Single Outputs
- Pre-Wired for easy Installation
- Lifetime Limited Warranty
- Operating Voltage: 6 to 14 Volts DC
- Current Draw: 1.2 Amps, (700 mA on MilliMiser setting), with one 8 ohm speaker
- Sound Level: 120 db @ 1 meter, 14 vdc, with one 8 ohm speaker
- Max. Speaker Loading: 4 Ohms
- Size: 2.75in X 3.6in (70mm X 91mm)