Fire-Lite's InnovairFlex D355PL non-relay photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. The InnovairFlex duct smoke detector senses smoke in the most challenging conditions, operating in air flow speeds of 100 to 4,000 feet per minute, temperatures of -4 degrees F to 158 degrees F, and a humidity range of 0 to 95 percent (non-condensing).

Features

• Photoelectric, integrated low-flow technology.
• Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/s).
• Versatile mounting options: square or rectangular configuration.
• Broad ranges for operating temperature (-4°F to 158°F, -20°C to 70°C) and humidity (0% to 95% non-condensing).
• Patented sampling tube installs from front or back of the detector with no tools required.
• Cover tamper signal.
• Easily accessible code wheels on sensor head (sold separately).
• Clear cover for convenient visual inspection.
• Remote testing capability.
• Accommodates the installation of an addressable relay module, sold separately, (CRF-300) for applications requiring a Form-C relay.

The SSU-SL-701-KIT Duct Carbon Monoxide Detector Kit provides early detection of carbon monoxide in air moving through the HVAC duct supply, return, or both in commercial, industrial, or residential applications.

The SSU-SL-701-KIT is fitted with a UL-Listed electrochemical sensor that notifies at for distinct levels of carbon monoxide PPM published hazardous by both OSHA and the NFPA, and has a life of approximately six years in normal environmental conditions. The specific alarm condition met is annunciated at the detector, and historical data can be retrieved from the unit to aid in resolving the source of contamination

Features

• Hybrid style sensor that monitors at the national standards set by OSHA and UL 2075/2034
• "Snap-in" sensor is easily replaced at end of life
• Solid green LED on sensor head indicates normal operation
• Detector Test Mode for aerosol CO testing
• Historical and retrievable reporting data stored at unit
• Performs self test every 24 hours
• Patented front or rear loading sampling/exhaust tubes
• Connectible to up to 30 other units
• Advanced sensor design yields internal dust filtering
• No additional screens or filters necessary
• Compatible with Building Automation and Combination CO/Fire Alarm Systems
• Complete wiring details permanently attached to unit

The SK-DUCT addressable duct smoke detector is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems. The duct housing allows for mounting of the SK-RELAY addressable relay module.

Features

• Versatile mounting options: square or rectangular configuration
• Rotary address switches for fast installation
• Rugged steel back box with clear plastic cover
• Patented sampling tube installs from front or back of the detector with no tools required
• Available space within housing to accommodate mounting of relay module
• Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels programmed for System Sensor protocol
• Compatible with version 2 or higher 5600 addressable fire alarm control panel