|◀ ◀ 1 - 12 of 2783 ▶ ▶|
View:

Essential Plus/4-DR System Wit h Power Distribution

Item#:
ES-4MP
You must be logged in to order this item. Log in here

HDMI Extender over Single Cat5e/6

The ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable.  HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.
  • Extend HDMI over a single Cat5e/6 cable
  • Supports resolutions from 480i to 1080p with zero signal loss
  • Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
  • HDMI Loop output for local HDMI display
  • Plug and play operation – comes as a complete set
  • IR Pass-through for remote control extension and operation
  • EDID Management switch
  • Two (2) 5VDC power supplies included
Item#:
MVE-AH1E1-01NQ
You must be logged in to order this item. Log in here

Kantech ioSMART Wireless Weiga nd Reciever.

Item#:
KT-WLS-WIE
You must be logged in to order this item. Log in here

2-Door Expander

The MD-D02B is a plug-in expansion module for Rosslare’s AC-225x-B access control panels that provides a 2-reader interface, 4 supervised inputs with end-of-line (EOL) resistor protection, and 4 relay outputs (5 Amp Form-C N.O./N.C.) to the panel. Installation of the module takes under one minute with the tailored expansion port in the panels and auto-recognize by the panel. Once it is installed and the panel is powered on, the expansion is recognized by the AxTraxNG server, and the MD-D02B can be programmed for access control and automation. Advanced communication with the controller allows for firmware update and real-time event logging, with support for full offline operation by the host panel.
  • Additional two proximity readers or keypads
  • Four relay outputs and four supervised inputs to the access control panel
  • Wiegand or Clock-and-Data transmission keypad or biometric reader compatibility
  • LED status feedback for 12 V power and relay activation
  • Cost effective and modular installation
  • Input and output configurability using Rosslare’s AxTraxNG™ software
Item#:
MD-D02B
You must be logged in to order this item. Log in here

MPA2, 4 DOORS, CONTROLLER & ME TAL ENCLOS

Item#:
MPA4MPSU
You must be logged in to order this item. Log in here

ME-1515 with Type B Plug Power Cable

Item#:
ME-1515-U
You must be logged in to order this item. Log in here

8 Reader Board Only

Item#:
CA8500B
You must be logged in to order this item. Log in here

HID Aero Intelligent Door Cont roller

Item#:
ADC-AC-X1100
You must be logged in to order this item. Log in here

Atlas460 Bundle in Metal Cabinet with Power Supply

  • A package of Atlas460 in Metal Cabinet with Power Supply
  • UL294 and CAN/ULC-S319 Certification Pending
  • Gross Weight: 12 lbs.
  • Package Size: 15 1/2" x 13 1/2" x 5"
Item#:
ATLAS460 BUN
You must be logged in to order this item. Log in here

3IR Multi-Spectrum Flame Detec tor/ sealed Polypropylene encl

Item#:
D390
You must be logged in to order this item. Log in here

2" Illuminated Surface Piezo Switch,, Push to Exit

Item#:
CM-9800/7
You must be logged in to order this item. Log in here

Communication Interlink Module

The CIM is a communication control module designed to use a CAN Bus communication network. Keyscans CIM provides optimized server to access control unit (ACU) communication. The Communication Interlink Module creates a new inter-panel ACU to ACU communication network that provides global communication functions including anti-passback, global input/output and global time zones. The CIM includes an impressive host of new features including ground loop protection, enhanced diagnostics, improved speed and unprecedented reliability.

Features

  • Provides optimized server to Access Control Unit (ACU) communication
  • Gives users a new ACU to ACU network providing inter-panel communication for global functions
  • Standardized Cabling establishes communication links with CAN Bus communication protocol using standard CAT5 cabling
  • Ground Loop Tolerance maximizes electrical isolation to earth ground providing tolerance against ground loops
  • Fault Tolerance ensures if one CIM fails it wont take the loop down with it. The CAN Bus protocol offers non-interrupted communication of remaining devices on the network
  • Communication Speeds provides optimized communication speeds, up to 115K BPS
  • Enhanced Diagnostics for quick and easy troubleshooting
  • Auto Bit Rate Conguration to automatically match bit rate speed with control unit conguration
  • Supports Keyscans plug-on TCP/IP network adapter NETCOM2P/6P
  • Uses a simplied ribbon cable connection to control unit for fast installation
  • Access Control Units with direct connectivity with the CAN Bus network now provide ACU to ACU to communication without server dependence. This permits a host of new features and capabilities

Item#:
CIM
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 2783 ▶ ▶|
View:
(Denotes required field.)