S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.
- Extend HDMI over a single Cat5e/6 cable
- Supports resolutions from 480i to 1080p with zero signal loss
- Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
- HDMI Loop output for local HDMI display
- Plug and play operation – comes as a complete set
- IR Pass-through for remote control extension and operation
- EDID Management switch
- Two (2) 5VDC power supplies included
Item#:
MVE-AH1E1-01NQ
You must be logged in to order this item.
Log in here
The MD-D02B is a plug-in expansion module for Rosslare’s AC-225x-B access control panels that provides a 2-reader interface, 4 supervised inputs with end-of-line (EOL) resistor protection, and 4 relay outputs (5 Amp Form-C N.O./N.C.) to the panel. Installation of the module takes under one minute with the tailored expansion port in the panels and auto-recognize by the panel. Once it is installed and the panel is powered on, the expansion is recognized by the AxTraxNG server, and the MD-D02B can be programmed for access control and automation. Advanced communication with the controller allows for firmware update and real-time event logging, with support for full offline operation by the host panel.
- Additional two proximity readers or keypads
- Four relay outputs and four supervised inputs to the access control panel
- Wiegand or Clock-and-Data transmission keypad or biometric reader compatibility
- LED status feedback for 12 V power and relay activation
- Cost effective and modular installation
- Input and output configurability using Rosslare’s AxTraxNG™ software
Item#:
MD-D02B
You must be logged in to order this item.
Log in here
When it comes to performance, and overall capability, the CA150 is comparable with our full line of access control units. CA150 is ideal for a single-door deployment or to augment an existing system with a need for one additional door.
Item#:
CA150
You must be logged in to order this item.
Log in here
4" x 6" fold-and-clip secure visitor paper badges. Can be used in ink and laser color printers. Print black/white or color badges. 1,000 badges per pack.
Item#:
LWVMSCVB
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)