TRENDnets 5-Port Gigabit GREENnet Switch, model TEG-S50g, provides performance, proven reliability, and power savings of up to 70%*. Eliminate network congestion with Gigabit speeds and total switching capacity of 10 Gbps. Plug and Play this sturdy metal switch for reliable high speed network connectivity
Features

• Plug and Play installation
• 5 x Gigabit ports
• 10 Gbps switching fabric
• Up to 70% energy savings with GREENnet technology*
• Sturdy metal switch
• Limited lifetime warranty

Altronix NetWaySP4WPX Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and four (4) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

• Input:
  • 115VAC, 60 Hz, 2.5A or 230VAC, 50/60 Hz, 1.3A.
• Power Output:
  • Four (4) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
  • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
  • 120W total power.
  • Integral surge protection.
• Fiber Port:
  • Two (2) Gigabit SFP ports.
  • Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).
• Ethernet
  • Four (4) 10/100/1000 Mbps ports.
  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5 or better structured cable.
  • Distance: up to 100m.
  • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
• Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
• LEDs
  • Individual PoE On LEDs for each port.
  • Individual IP Link status, 10/100Base-T/active LEDs for each port.
  • ALOS LED indicates fiber connection for SFP port.
  • Heartbeat LED indicates proper operation of the unit.
• LINQ Technology
  • Remote network management allows for camera/device reset and monitoring.
  • Provides local and/or remote access to critical information via LAN/WAN.
  • Email and Windows Dashboard Alert notifications report real-time diagnostics.
  • Event log tracks history.

• 8 x Gigabit PoE+ ports
• 2 x SFP slots
• 75W PoE power budget
• Easy-to-use web-based management interface
• Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
• Bandwidth control per port
• Private and Voice VLAN support
• 20Gbps switching capacity
• IEEE 802.1p QoS with queue scheduling support
• Fanless rack mountable metal housing

Altronix P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1G transmission rates. The P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km. It is recommended to pair (two per fiber link) remote and head-end with same SFP module.

• Features:
  • IEEE 802.3a compliant.
  • Spans distances up to 10km (6.3 miles)
  • Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA).
• Standards:
  • Class 1 FDA and IEC60825-1 Laser Safety Compliant.
  • Compliant with MSA SFP Specification.
  • Compliant with SFF-8472.
• Connector Type:
  • LC Duplex.
• Data Rate:
  • Up to 1.25Gbps.
• Wave:
  • 1310nm FP Laser Transmitter.
• TX power (dBm):
  • -22 ~ -3
• RX Sensitivity (dBm):
  • -10 ~ -3
• Distance:
  • 10km with 9/125 micron SMF.

TRENDnet's 10-Port Gigabit Web Smart PoE+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight PoE+ Gigabit ports and two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, and monitoring features at a reduced cost.

• 8 x PoE+ Gigabit ports
• 2 x Gigabit Ethernet ports and 2 x shared SFP slots
• Up to 30 Watts per port with a 75 Watts total power budget
• 20 Gbps switching capacity
• Rack mountable