|◀ ◀ 25 - 36 of 1873 ▶ ▶|
View:

PoE+ Gigabit Injector

TRENDnet's Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit PoE+ signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE and PoE+ devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) away.
  • Full Duplex Gigabit speeds
  • Supplies PoE (15.4W) or PoE+ (30W) power
  • Integrated power supply
  • Network a PoE device located up to 100 meters (328 ft.) away
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port
  • Save on installation and equipment costs
  • IEEE 802.3af and IEEE 802.3at compliant
Item#:
TPE-115GI
You must be logged in to order this item. Log in here

8-Port Gigabit PoE+ Switch

TRENDnet's 8-Port Gigabit PoE+ Switch, model TPE-TG80g, offers 8 x Gigabit PoE+ ports (30 Watts/port), a 16 Gbps switching capacity, and a PoE power budget of 123 Watts. Plug and Play this sturdy metal switch for reliable high speed PoE networking.
  • 8 x Gigabit PoE+ ports
  • 123 W PoE power budget
  • 16 Gbps switching capacity
  • Sturdy metal switch
  • Plug and Play installation
Item#:
TPE-TG80G
You must be logged in to order this item. Log in here

120 W Single Output Industrial DIN-Rail Power Supply

TRENDnet's high efficiency 120 W Single Output Industrial DIN-Rail Power Supply, model TI-S12048 (Mean Well SDR-120-48), supplies up to 120 Watts (48 V, 2.5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.
  • Industrial power supply with integrated DIN-rail mount
  • Provides up to 120 Watts of power (48 V, 2.5 A)
  • Built-in active PFC (PF > 0.93)
  • Short circuit/overload/over voltage/over temperature protection
  • High efficiency (91%) design
  • UL 508 approved
  • 100 % full load burn-in test
  • Extreme -25 to 70 °C (-13 to 158 °F) operating temperature range
Item#:
TI-S12048
You must be logged in to order this item. Log in here

52-Port Gigabit Web Smart PoE+ Switch

TRENDnet's 52-Port Gigabit Web Smart PoE+ Switch, model TPE-5240WS, delivers advanced management features with a 104Gbps switching capacity. This rack mountable IPv6 ready switch comes with an intuitive web-based interface. Advanced traffic management controls, troubleshooting, and SNMP monitoring make this a powerful solution for SMB networks. The TPE-5240WS provides 48 gigabit PoE+ ports with a total power budget of 370W, and four shared gigabit ports (RJ-45 or SFP). The PoE+ standard supplies up to 30W of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Internet cameras, and VoIP telephony systems.
  • 48 x Gigabit PoE+ ports
  • 4 x Shared Gigabit ports (RJ-45 or SFP)
  • 370W PoE power budget
  • Easy-to-use web-based management interface
  • Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
  • Bandwidth control per port
  • Private and Voice VLAN support
  • Smart Fan
  • 104Gbps switching capacity
  • IEEE 802.1p QoS with queue scheduling support
Item#:
TPE-5240WS
You must be logged in to order this item. Log in here

16-Port Gigabit PoE+ Switch

TRENDnet's 16-Port Gigabit PoE+ Switch, model TPE-TG160g, offers 16 x Gigabit PoE+ ports, a 32 Gbps switching capacity, and a PoE power budget of 246 Watts. This rugged metal switch comes with a rack mount kit.
  • 16 x Gigabit PoE+ ports
  • 246 W PoE budget
  • 32 Gbps switching capacity
  • Sturdy metal switch
  • Rack mount brackets included
Item#:
TPE-TG160G
You must be logged in to order this item. Log in here

50 Pack Cat6 RJ-45 Keystone Jack

  • 50-pack of Cat6 tool-less keystone jacks
  • 90° angle termination design
  • Cat6 for steady connection to copper Gigabit & 10G switches
  • Compatible with Cat5, Cat5e, and Cat6 cabling
  • Color-coded labeling for T568B wiring
  • Gold-plated contacts for improve conductivity and corrosion resistance
  • Use with TC-KP24 blank keystone patch panel (sold separately)
Item#:
TC-K50C6
You must be logged in to order this item. Log in here

Gigabit 4PPoE Injector

Item#:
TPE-119GI
You must be logged in to order this item. Log in here

24-Port PoE Switch with 2 Upli nk Ports

Item#:
VIS-LRPOE24-2AN
You must be logged in to order this item. Log in here

14 dBi WiFi AC867 Outdoor PoE Preconfigured Point-to-Point Bridge Kit

  • 5GHz WiFi AC867 point-to-point bridge kit
  • Includes two preconfigured TEW-840APBO access points
  • 14 dBi directional antennas
  • Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
  • Proprietary PoE power adapters included
  • IP56 outdoor weather rated housing
  • 1 x Gigabit PoE (in) port, and 1 x Gigabit port
Item#:
TEW-840APBO2K
You must be logged in to order this item. Log in here

Gigabit Ultra PoE+ Injector

TRENDnet's Gigabit Ultra PoE Injector, model TPE-117GI, combines electrical power with a Gigabit network connection to produce a Gigabit Ultra Power over Ethernet Plus signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your Ultra PoE devices and PoE+ devices. Use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
  • Full Duplex Gigabit speeds
  • Supplies PoE (15 watts), PoE+ (30 watts) or Ultra PoE power (60 watts)
  • Network a PoE device located up to 100 meters (328 ft.) away
  • Converts a non-PoE Gigabit port to an Ultra PoE Gigabit port
  • Save on installation and equipment costs
  • Supports IEEE 802.3af / 802.at / Ultra PoE
Item#:
TPE-117GI
You must be logged in to order this item. Log in here

Dual 1G Fiber SFP, 4 port 10/100/1000 PoE/PoE+

Altronix NetWaySP4WPX Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and four (4) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

  • Input:
    • 115VAC, 60 Hz, 2.5A or 230VAC, 50/60 Hz, 1.3A.
  • Power Output:
    • Four (4) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
    • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
    • 120W total power.
    • Integral surge protection.
  • Fiber Port:
    • Two (2) Gigabit SFP ports.
    • Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).
  • Ethernet
    • Four (4) 10/100/1000 Mbps ports.
    • Connectivity: RJ45, auto-crossover.
    • Wire type: 4-pair CAT5 or better structured cable.
    • Distance: up to 100m.
    • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
  • Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • LEDs
    • Individual PoE On LEDs for each port.
    • Individual IP Link status, 10/100Base-T/active LEDs for each port.
    • ALOS LED indicates fiber connection for SFP port.
    • Heartbeat LED indicates proper operation of the unit.
  • LINQ Technology
    • Remote network management allows for camera/device reset and monitoring.
    • Provides local and/or remote access to critical information via LAN/WAN.
    • Email and Windows Dashboard Alert notifications report real-time diagnostics.
    • Event log tracks history.

Item#:
NETWAYSP4WPX
You must be logged in to order this item. Log in here

60W HPoE Injector, Fully compl iant with IEEE802.3af/at/bt, P

Item#:
SPO-6011
You must be logged in to order this item. Log in here
|◀ ◀ 25 - 36 of 1873 ▶ ▶|
View:
(Denotes required field.)