|◀ 37 - 48 of 224 ▶|
View:

The T-Link universal IP alarm communicator (TL300) is a valuable addition to the T-Link family of Internet/network alarm communicators. Capable of communicating with any control panel (including third-party manufacturers) that uses the Contact ID format, the simple-to-install TL300 saves end-users money by taking advantage of their existing IP networks and security equipment to create fully supervised security solutions between protected premises and central monitoring stations. This method provides flexibility and an always-on, two-way line of communication. The TL300 communication stream is small and requires only a limited amount of network bandwidth. This ensures that the integrity of the data being transferred never becomes compromised. To reduce security risks, the module utilizes industryleading, 128-bit AES encryption, polling and hardware substitution protection.

Features

  • Compatible with most control panels that use the Contact ID format
  • Instant, always-on IP communication
  • Works over local LAN/WAN network or the Internet
  • 128-bit AES encryption (NIST approved)
  • Supports DHCP (dynamic IP addresses)
  • Low network bandwidth requirements
  • Compatible with 10/100BaseT networks
  • Reports events to 2 different re ceiver IP addresses
  • UL standard & encrypted line security
  • 12-24 volt DC support (v1.5 and higher)
  • 4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone module
  • Programmable through the PK5500 LCD keypad or T-Link Console software
  • Software upgrades via network
  • Compatible with Sur-Gard System I/II/III/IV monitoring station receivers
  • Polling and hardware substitution protection

Item#:
TL300
You must be logged in to order this item. Log in here
This item has been discontinued and replaced by item 

The Encrypted Panic Button Remote is a compact, battery powered, wireless panic button that transmits an Emergency signal from any location within radio frequency (RF) range of the control panel. The signal can be transmitted to the control panel, whether the security system is armed or disarmed.

Features

  1. Encrypted Protocol for Enhanced Security
  2. For triggering emergency alarm
  3. Dimensions: 1.65 x 1.20 x 0.50 in. (LxWxD)
  4. Weight: 0.45 oz. (including battery)
  5. 5-second button lockout
  6. Lithium battery with 3 years life
  7. Completely water resistant
  8. Completely supervisable
  9. Mounting options: lanyard, wristband, wall mount, belt clip, car-visor clip
 
Item#:
2GIG-PANIC1E-345
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
AW-LS-MOUNT
You must be logged in to order this item. Log in here
The Flex IO enables new levels of flexibility for monitoring valuable
property and assets anywhere that LTE connectivity is available.
Features
• Detect open/close using magnetic
reed switch
• Detect state change for third-party
device using Loop Input
• Change state of third-party and device
using Relay Output (requires DC power to
support always-on cellular connection)
Item#:
ADC-FLEX-100-TL
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
AW-LS-CONDUIT
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The Flex IO enables new levels of flexibility for monitoring valuable
property and assets anywhere that LTE connectivity is available.
Features
• Detect open/close using magnetic
reed switch
• Detect state change for third-party
device using Loop Input
• Change state of third-party and device
using Relay Output (requires DC power to
support always-on cellular connection)
Item#:
ADC-FLEX-100-AT
You must be logged in to order this item. Log in here
|◀ 37 - 48 of 224 ▶|
View:
(Denotes required field.)