|◀ 121 - 132 of 693 ▶|
View:
The IQ Temp is two encrypted sensors combined into a single unit. Sending a signal to the panel if temperatures rise above 100° F or below 40° F you’ll know if there is a problem before it becomes a disaster.
  • Encrypted sensor technology
  • Freeze detection alerts panel is temp drops below 40° F
  • High temp sensor alerts panel if temperature exceeds 100° F
  • Great to detect HVAC failure
  • Protect elderly, infirm, and pets.
  • Get a text notification sent to your phone if the IQ Temp detects a potential problem
Item#:
QS5535-840
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Sends a notification to the alarm panel when a door, gate or window is opened or closed.
  • Enables two unique zones. One is for an internal magnetic reed switch while the second is for a normally-closed circuit that can have external devices wired to it.
  • Can be painted to match its mounting surface.
  • Sensor Dimensions: 4.6 x 2.1 x 1.5 inch
  • Magnet Dimensions: 4.1 x 1.0 x 1.1 inch
  • Battery life: Up to 5 years
  • Wireless Signal Range: 350 ft (106.7m), open air with Wireless Control Panel
  • Transmission Frequency: 345 MHz

Item#:
2GIG-DW30-345
You must be logged in to order this item. Log in here

The PG9945 is designed to communicate with the security system to report openings and closings of doors & windows. Known for its versatility and reliability, the PG9945 is an easy to install device ideal for a wide range of environments.

The PG9945 PowerG Door/Window Contact is equipped with a visible link quality LED indicator on the contact that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad. Additionally, device configuration is quick and easy with no hardware switches or need to re-open devices. All device configuration settings are handled on the system keypad.

Features:

  • Selectable operation of auxiliary input as NO, NC or EOL supervision
  • Visible link quality indicator shown on device
  • Case and wall tamper
  • Available in either white (PG9945) or brown (PG9945BR) to blend into any décor
  • User-selectable operation of auxiliary input as NC or EOL
  • Prolonged battery life (8 years with typical use)
  • Back tamper switch options
  • Dimensions: 81 x 32 x 25mm (3.19 x 1.25 x 1in)
  • Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
Item#:
PG9945BR
You must be logged in to order this item. Log in here
The ELK-319PB1 is a Wireless Heavy Duty 1 Button Panic device that that transmits to an alarm panel when pressed. It can be used police, medical, etc. alarm activation.
This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • Includes hardware for 3 mounting options: Belt Clip, Wall Mount, and Lanyard Clip
  • Powered by replaceable CR2450 battery
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: One (1) CR2450 3VDC lithium coin-cell 
  • Operating Temp Range: 32 to 120°F (0 to 49°C)
  • Dimensions: 3.0" L x .2.0" W x 0.7" D
Item#:
319PB1
You must be logged in to order this item. Log in here
This item has been discontinued and replaced by item 

The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.

Features:

  • Monitors for the sound of breaking glass
  • Two test LEDs
  • Dual shatter recognition technology
  • 360 range
  • Tamper protected
  • Fully supervised
  • Lithium battery
  • ETL listed

Item#:
2GIG-GB1-345
You must be logged in to order this item. Log in here

This thin wireless window sensor, 6021, is perfect for double hung and casement style wood/vinyl windows and features Elk's industry leading two-way technology.
Includes:

  • Mini Wireless Window Sensor
  • Magnet
  • Replaceable 3V Lithium Coin Cell battery
  • Double Sided Tape for both transmitter and magnet
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
  • One built-in reed switch
Specifications:
  • 902 Mhz - 928 Mhz frequency hopping
  • Maximum operating gap of reed: 3/8in.
  • Max. recommended mounting distance from receiver: 100 ft.
  • 3V CR2032 lithium battery
  • Battery Life: 3 years typical
  • Size: 1.1in. W x 2.3in. L x .25in. D, Magnet: .37in. W x 2.3in. L x .25in. D

Item#:
6021
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 121 - 132 of 693 ▶|
View:
(Denotes required field.)