• Each unit includes four onboard fully supervised audio circuits which are expandable to eight circuits when an ECC-CE4 module is added
• Any combination of up to eight ECC-50DAs or ECC-125DAs per system for a total of 1100 watts of audio power and 24 speaker circuit outputs.
• Supports both Class A (Style Z) and Class B (Style Y) wiring.
• Easy setup and configuration by using a simple, built-in web based programming utility on the ECC-50/100
• UL2572 (Communication and Control Units Mass Notification Systems).
• Built-in power supply and battery charger that supports up to 35AH. (For batteries larger than 18 AH, use the BB-26 or BB-55F Battery Box.)
• ECC-50DA is field selectable for 25 volts or 70.7 volts of operation.
• Sturdy, scratch resistant cabinet.

The Evax ATM card is an audio transponder module that allows the user to interface an external audio source into an EVAX panel or deliver audio output from an EVAX panel into an external audio source. The ATM works as both input and output. The audio input must be a balance line and 1VRMS into 600 ohms. The ATM card is 1V, 25V and 70V selectable. It can be in conjunction with conventional EVAX panels and HMX master panels. The ATM is not supervised and is a non UL listed item.

Features

• Field selectable audio input voltage
• Activation capable either via contact closure or signal presence
• Isolated input/output signals

The EVAX EVX-IL8 LED Input Module can be used for page zone control, message selection, and control functions. The inputs will accept external N.O Dry contacts. On activation, the corresponding LED will indicate red.

Features

• 4 Class B or 2 Class A Field Selectable Speaker Circuits
• 25/70 Vrms Field Selectable
• Configurable with EVX-SL8 for Zone Selection
• Smart Power detection, provides short circuit protection
• Up to 64 circuits on a system
• Up to 50W on any circuit at 70V