DITEK's LVLP surge protectors guard multiple low voltage applications in the fire and security industries. The DTK-2LVLPLV is ideal for two 24V hardwired loop circuits.

• Protects low voltage data and signaling loop circuits
• Suitable for both AC and DC circuits
• Series connection, parallel function adds no resistance to circuits

The DTK-2MHLP24B provides surge protection for two 24V alarm system loop circuits in a field-replaceable module. With required snap-track bases, protect up to 10 pairs with a common ground.

• Protects two 24V pairs per module
• Multi-stage SAD technology provides the best possible protection
• Field-replaceable modular edge card connection with single point ground for fast installation

The DTK-120HWLOK Surge Protective Device (SPD) with NFPA 72 2013 10.6.5.2 compatible lockout kit protects 120VAC equipment panels and dedicated branch circuits while preventing accidental alarm disconnect.

• Approved for 20A circuit breakers
• SCCR rating of 10kAIC complies with NEC Article 285.6
• NEMA 4X weatherproof enclosure allows for use in harsh environments
• Lockout kit prevents accidental disconnect of fire alarm system
• UL1449 4th Edition Type 1 SPD
• Diagnostic LED

• Uses SAD and GDT technologeis to provide optimal protection for shielded Ethernet, PoE and PoE extender circuits
• Rapid-replacement modular design allows modules to be swapped from front of device without removing from rack
• Robust 20kA per pair surge current capacity is the highest offered in a product designed for shielded network devices
• PoE Plus and HiPoE ready for high-wattage applications
• Optional modules available to support PoE Extender Circuits
• Supports up to 24 modules in a single enclosure

The DTK-120HW provides surge protection for 120VAC equipment panels and dedicated branch circuits. The compact, parallel-mount design allows for installation in a variety of locations.

• Approved for 20A circuit breakers
• SCCR rating of 10kAIC complies with NEC Article 285.6
• NEMA 4X weatherproof enclosure allows for use in harsh environments
• UL1449 4th Edition Type 1 SPD
• Diagnostic LED

DITEK's DTK-4LCLPCR provides surge protection for card readers operating on 12/24V power. Protects four pairs of power/data connections.

• Protects power, LED and data lines
• Single point ground for all protected circuits
• Series connection, parallel function adds no resistance to loop circuits

The DTK-2MHLP24FWB provides surge protection with exclusive load removal technology for two 24V alarm system loop circuits.

• Protects two 24V pairs per module
• Multi-stage SAD technology provides the best possible protection
• Field-replaceable modules with hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground

The DTK-MRJPOE is a 10GbE PoE surge protector that is PoE Plus and High PoE ready. This point of use surge protector is compatible with CAT5e, CAT6 and CAT6A cabling infrastructure, and can be installed at the equipment end, or ahead of injecotrs or midspan devices.

• Uses SAD and GDT technologies for superior protection
• Data speeds up to 10GbE without signal degradation
• PoE Plus, HiPoE ready for high-wattage applications

DITEK's LVLP surge protectors are used in multiple low voltage security applications. The DTK-4LVLPX protects four 12V hardwired signaling circuits.

• Protects low voltage data and signaling loop circuits
• Suitable for both AC and DC circuits
• Series connection, parallel function adds no resistance to circuits