|◀ 721 - 732 of 23896 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Altronix VR6 Voltage Regulator converts a 24VDC input into a regulated 5VDC or 12VDC selectable output at up to 6A supply curent. It reduces the cost of adding an additonal power supply to achieve 24VDC and 12VDC or 5VDC simultaneously. / Altronix PDS8CB dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources. This power is distributed over a total of eight (8) PTC protected outputs.
VR6

  • Power Input / Output:
    • Input: 24VDC @ 1.75A  Output: 5VDC @ 6A.
    • Input: 24VDC @ 3.5A  Output: 12VDC @ 6A.
  • Output:
    • 5VDC or 12VDC regulated output.
    • Output rating 6A max. non power-limited.
    • Surge suppression.
  • LED Indicators:
    • Input and output LEDs.
  • BTU/Hr (approx.):
    • 5VDC: 15 BTU/Hr.
    • 12VDC: 37 BTU/Hr.
PDS8CB
  • Power Input 1 and Input 2 Voltage Range:
    • 5VDC to 24VDC up to 9A each or 16VAC to 28VAC up to 9A each.
  • Outputs:
    • Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2.
    • Individual outputs may be set to OFF position for servicing.
    • PTC protected outputs rated @ 2A. (total output current should not exceed max current rating of power supply employed).
    • Surge suppression.
  • LED Indicators:
    • Eight (8) individual output LEDs.

Item#:
PDS8CBK1
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the central Station to verify an alarm, or by a user from the telephone remote control to check on elderly parents, children, etc. Up to 12 microphones (M1TWS) may be connected. 
  • Interfaces Listen-in Microphones to the M1Gold 
  • Powers Microphones and Performs Switching 
  • Provides 3 Separate Microphone Zones 
  • Each Zone Can Have Up to 4 Microphones 
  • All Programming and Operation Is Performed from the M1 Control
  • Requires ELK-M1TWM or M1TWS Microphones 
  • Operating Voltage: 12 Volts D.C. 
  • M1TWI Board Current Draw: 10mA 
  • Microphone Current Draw. 5mA each 
  • Housing Dimensions: 4.375" x 3.0" x 1.125"
  • Circuit Board Dimensions: 3.5" x 2.75"
Item#:
M1TWI
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Microphone and 20 Watt speaker combination for use with M1 Two-Way Listen-In Interfaces
  • Simple four wire connection 
  • High Sensitivity 
  • Up to 12 may be connected to one M1 Two Way Listen-In Interface
  • Operating Voltage: Powered from M1TWA, M1TWI, or M1EZ8TWI 
  • Current Draw. 5mA each 
  • Speaker Impedance: 8 ohms 
  • Speaker Rating: 20 Watts Nominal 
  • Size: 4.25" x 4.25" x 2.13"
  • Color: White
Item#:
M1TWS
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 721 - 732 of 23896 ▶|
View:
(Denotes required field.)