|◀ ◀ 49 - 60 of 23640 ▶ ▶|
View:

Alarm.com POE to Wifi Bridge

Alarm.com ADC-W110 PoE to Wi-Fi Bridge

The ADC-W110 makes it easy to install any Alarm.com Power over Ethernet (PoE) camera, eliminating the need to run cable wiring throughout a home or business.

Simply plug the device into a wall outlet to provide a PoE camera with both electrical power and secure, reliable Wi-Fi connectivity.

The ADC-W110 integrates with Alarm.com, providing easy post-installation troubleshooting and enhanced security.

Features

  • Simple plug-in installation
  • Secure, reliable Wi-Fi connectivity
  • Eliminate the need for wires

Item#:
ADC-W110
You must be logged in to order this item. Log in here

Junction box for bullet camera s- White

Item#:
DWC-BLJUNCW
You must be logged in to order this item. Log in here

5 GHz N300 Outdoor Wireless CP E

Dahua’s DH-PFWB5-10n is 5 GHz CPE that delivers high-performance and stable operation. This product combines an advanced radio core containing MIMO 2 x 2 technology with an integrated, high-gain, dual polarization directional antenna. The feature-rich operating system is optimized for ultra-high performance wireless communications while optionally allowing compatibility with older 802.11a standard devices.
  • Integrated 5 GHz (2 x 2) MIMO Radio
  • Recommended for up to 3.11 miles (5 km) PTP/PTMP Wireless Connection (as a station in PTMP link)
  • Frequency 5.150 – 5.850 GHz  (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)
  • High-performance and Stable Operation
  • Improved Noise Immunity
  • TDMA for Reliable Communication
  • Dual Firmware
  • IP66 Ingress Protection
  • Built-in tools include: Site Survey, Link Test, Antenna Alignment, Spectrum Analyzer, Ping & Trace for Configuration and Debugging
Item#:
DH-PFWB5-10N
You must be logged in to order this item. Log in here

Power Supply, 8 PTC Outputs, 16VAC @ 6A, 115VAC, BC100 Enclosure

AL168CB Multi-Output Power Supply provides 16VAC or 18VAC distributed via eight (8) PTC protected outputs for powering multiple security system or access control panels.

Item#:
AL168CB
You must be logged in to order this item. Log in here

21.5" Full HD 1920x1080 LED Mo nitor HDMI, VGA

Item#:
IMHD-22H
You must be logged in to order this item. Log in here

CCTV Power Supply, 8 Fused Outputs, 24/28VAC @ 4A, 115VAC, BC100 Enclosure

ALTV248 AC Wall Mount CCTV Power Supply provides 24VAC or 28VAC distributed via Eight (8) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories.

  • Secondary fuse rated @ 5A/250V.
  • AC power LED.
  • Power ON/OFF switch.
  • Spare fuses provided. (all models w/primary and/or secondary fuses)

Item#:
ALTV248
You must be logged in to order this item. Log in here

X-LARGE GRAY BATTERY CABINETBC 5"D, 19 gauge steel, includes

Item#:
BC400
You must be logged in to order this item. Log in here

The license is for channel (AC Ti video devices) to work on N

Item#:
LNVR3003
You must be logged in to order this item. Log in here

Supports 16 camera Ch. HCL

Item#:
HIKCENTRALLVSS16CPRO
You must be logged in to order this item. Log in here

Tabletop Smart Gateway FAST) WAN connection

Item#:
ADC-SG130
You must be logged in to order this item. Log in here

Bundle of ADC-VC729P (PoE++/DC powered) & TL-PoE170S PoE++ I

Item#:
ADC-VC729P-BNDL
You must be logged in to order this item. Log in here

Managed NAC Power Extender - 24VDC @ 10 amp. 4 - Class A or 8 - Class B NAC circuits

  • Programmable LCD display interface.
  • EOL resistor value is programmable by output.
  • Ethernet port interface for remote programmability and monitoring.
  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter, Gentex®, System Sensor® , and CooperWheelock®.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision directed to input 1 or input 2.
  • Common trouble Dry N.C. output for reporting trouble to remote FACP.
  • Ground fault detection - Ground fault maximum test impedance 1,000 ohm.
  • Ground fault Dry N.O. output to report ground fault to remote FACP.
  • CO Temporal Code 4 (NFPA720) include Gentex® , Potter and System Sensor® devices
Item#:
FIRESWITCH108
You must be logged in to order this item. Log in here
|◀ ◀ 49 - 60 of 23640 ▶ ▶|
View:
(Denotes required field.)