|◀ 21901 - 21912 of 23921 ▶|
View:
  • 1000TVL Image Resolution
  • 2.8-12mm Manual Zoom Lens
  • 40m with IR LED's IR Range
  • 12VDC/24VAC Voltage
  • IP66 Water Resistance
  • 1/3" Sony 1.4MP CMOS Image Sensor
  • 500mA Power Consumption
  • WDR, Built-in Auto Gain Control, IR LED's
  • 14° - 122°F (-10° - 50°C) Operating Temperature
Item#:
PEAKCB1.4MPA52812I
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
This item has been discontinued and replaced by item 
Item#:
SRD-1654D-10TB
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Altronix Netway5B is a space saving switch board that mounts easily inside of Altronix enclosures. It allows for the connection of up to 4 IP devices within the enclosure with a single Ethernet cable going to the headend.
Input
  • PoE (IEEE 802.3at standard midspan/endspan), or 12VDC or 24VDC from a UL Listed power source.
Output
  • Five (5) data ports.
Ethernet
  • Five (5) 10/100/1000 Mbps ports.
  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5e or higher structured cable.
  • Distance: up to 100m.
  • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
LED Indicators
  • Individual IP Link status, 10/100Base-T/active LEDs for each port.
Item#:
NETWAY5B
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The 12-Port Cat. 6 Unshielded Patch Panel model TC-P12C6 provides a 250MHz connection to 12 x Gigabit RJ-45 Ethernet ports. This 10 inch wide patch panel is well suited for home and SMB applications. Control cable clutter with included removable cable pass-through holders and cable ties. A writing surface above each port allows users to label respective connections. Use with TRENDnet's Punch Down Tool with 110 and Krone Blade, model TC-PDT, and RJ-11/RJ-45 Crimp/Cut/Strip Tool, model TC-CT68.
  • 12 x Gigabit RJ-45 ports
  • 10 inch wide patch panel is well suited for home and SMB applications
  • Designed for Category 6 cabling
  • Includes cable management holders, tie, and port labels
  • Use with TRENDnet TC-PDT Punch Down Tool
Item#:
TC-P12C6
You must be logged in to order this item. Log in here
Weather-Resistant, Heavy Duty Steel.

PROTECT YOUR CAMERA AGAINST THEFT & BREAKAGE:

  • Holes in the back to anchor to any surface
  • Holes on both sides to insert a cable-lock (V-CB-LOCK) or a standard lock
  • Hole in front to install a lock (a MINIMUM diameter of 3/8″ (9mm) for the shackle or rod of the lock is recommended)
  • Fits VOSKER V150 security cameras
  • Compatible with VOSKER 360 mounting arm (V-MT360)
  • Removable front part for easy usage
  • Heavy-Duty Steel security box
Item#:
V-SBOX2
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 21901 - 21912 of 23921 ▶|
View:
(Denotes required field.)