Hybrid 2U Front Accessible recorder with 8 IP cameras licenses (64 max) and 16 analog at 30 FPS (16 looping included). exacqVision Professional or Enterprise server, client, web/mobile software pre-installed with 3 years software upgrades and hardware warranty. Win10 or Ubuntu Linux 16.04 on SSD. HDMI, DVI-D, DisplayPort, VGA (2 max simultaneous), Dual GB NICs, 2 multiplexed monitor outputs, RS-485 serial port, 16 alarm inputs, 16 alarm outputs, 16 audio inputs. Keyboard and mouse included.

Altronix P1MM are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up to 550m. It is recommended to pair (two per fiber link) remote and headend with same SFP module.

• Features:
  • IEEE 802.3a compliant.
  • Spans distances up to 550m (1804 ft.)
  • Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA).
• Standards:
  • Class 1 FDA and IEC60825-1 Laser Safety Compliant.
  • Compliant with MSA SFP Specification.
• Connector Type:
  • LC Duplex.
• Data Rate:
  • Up to 1.25Gbps.
• Wave:
  • 850nm VCESL Laser Transmitter.
• TX power (dBm):
  • -18 ~ 0
• RX Sensitivity (dBm):
  • -8 ~ -4
• Distance:
  • 550m with 50/125 micron MMF.

Altronix T2MK75F16 is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

• Input: 120VAC 60Hz/8A.
• Output:
  • 12VDC up to 9.3A and 24VDC up to 9.2A max current.
  • Sixteen (16) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
• Fully assembled kit includes:
  • Trove2 enclosure with TM2 backplane and TMV2 door backplane
  • One (1) eFlow104NB and One (1) eFlow102NB - Power Supply/Charger
  • Two (2) ACM8 - Fused Access Power Controller
  • One (1) PD8UL - Power Distribution Module
• Back-up Battery (not included):
  • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
  • Type - Sealed lead acid or gel type.
  • Fuse Rating: 15A/32V
  • Failover - Upon AC loss, instantaneous.
• Supervision:
  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
• LED Indicators:
  • Input - 120VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.