|◀ 109 - 120 of 209 ▶|
View:
You must be logged in to order this item. Log in here
Low profile disc antenna
Item#:
1006ANT
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
TG-7E offers two pathways to reliably transmit signals: a wired LAN connection to the Internet and 5G LTE-M cellular. It operates on panel power or via plug-in AC adapter, and is available in AT&T or Verizon models.
PRODUCT FEATURES
  • Dual communication paths - If the Internet connection is interrupted or the LAN goes down, always-on 5G cellular will immediately step in.
  • Powers directly from the fire panel’s 12V auxiliary power supply or via plug-in transformer (included).
  • Uses LTE-M bands for 4G and 5G network compatibility, better building penetration, and longest product life.
  • Interfaces with panel over the dialer (DACT) connection for universal compatibility.
  • Telguard communicators are compatible with more alarm formats than any other brand. The signal will reliably get to the central station. 
Item#:
TG-7E-A
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Commercial Fire/Burg, LTEA AT& T Alarm Communicator Red Metal

This item has been discontinued and replaced by item 
Item#:
SLE-LTEA-CFB-PS
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The tilt sensor is compatible with GC2 firmware revisions 1.14 and higher

The sensor (Model 2GIG-TILT1e-345) is designed for applications where the tilt status of an asset, such as a garage door, needs to be monitored. Other uses might include: mailbox doors, large pet doors, or hinged storm cellar doors. The tilt sensor communicates with the control panel using the 345 MHz frequency. Once the sensor is tilted to 45 degrees, the sensor will transmit to the panel. The sensor will also send a restore signal when the sensor it returned to less than 45 degrees.

The 2GIG-TILT1e-345 is equipped with a cover tamper switch and low battery monitoring. If the case of the Tilt Sensor is removed for any reason, the radio transmitter will send a tamper alert. Should the battery voltage drop below a prescribed level, the sensor will send a low battery report indicating that the battery should be replaced. The 2GIG-TILT1e-345 is compatible with GC2e firmware revisions 1.14 and higher. 


Features

  1. Encrypted Protocol for Enhanced Security
  2. Encrypted Wireless Tilt Sensor
  3. Sensor transmits alert when tipped 45° off vertical
  4. Restore signal sent when sensor returned to less than 45°
  5. Requires GC2e panel firmware revision 1.14 or higher
  6. Long life lithium battery included
  7. Screw, adhesive mount hw. included
Item#:
2GIG-TILT1E-345
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 109 - 120 of 209 ▶|
View:
(Denotes required field.)