|◀ ◀ 37 - 41 of 41 ▶ ▶|
View:

433mHZ 1 Channel Nano Receiver

Designed to control automatic door or electrified locking hardware with code-hopping technology for increased security.

Features

  • Designed to Control Automatic Closing and Anti-Burgular Systems
  • Works with 400W1-433
Item#:
400RC433
You must be logged in to order this item. Log in here

Belt-Clip Holster/wall-mount switch for SK-919TP1H-BUQ, SK-919TP2H-NUQ, & SK-919TP4H-NUQ

Use for all slimline handheld transmitters
Item#:
SK-9HBC
You must be logged in to order this item. Log in here

TS1 Touch Screen for GC2 Panels - 900MHz

This item has been discontinued and replaced by item 

The Wireless Touch Screen Keypad (2GIG-TS1) is a wall-mounted, full-color, touch screen interface that provides many of the same easy-to-use keypad functions available on the control panel. It is designed for indoor use only and gives users the ability to control lights, thermostats, and door locks, as well as to view the status of every sensor zone.

When the 900 MHz Transceiver Module (2GIG-XCVR2-345) is installed in the GC2 control panel, the system can be programmed to communicate with up to four (4) Wireless Touch Screen Keypads.

Features:

  • Full color touch screen interface
  • Same easy-to-use interface as the GC2 panel
  • One-touch Home and Emergency navigation
  • Add up to 4 Wireless Touch Screen Keypads to 1 system
  • Easy access to Z-Wave functionality
  • See and hear system status, chimes and alerts
  • Screen and buttons can be configured to darken completely and light back up with one touch
  • Requires XCVR2 to be installed in main panel
Specifications:
  • Display: 4.3 in. QVGA full color
  • Dimensions: 6.7 in. x 4.3 in. x 0.8 in.
  • Wireless: 900 Mhz frequency hopping bi-directional communication
  • Range: 500 feet line of site
  • Power: 14 VAC using including AC adapter
  • Speaker: Playback of locally store annunciation messages, chimes and alarms
Item#:
2GIG-TS1-E
You must be logged in to order this item. Log in here

RF Crystal Rec, 2 Antenna, GE

This item has been discontinued and replaced by item 
The ELK-M1XRFEG is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points).
The M1XRFEG receiver is a dual (2) antenna, phase diversity design capable of long range wireless coverage. It is compatible with ELK's 319 Series Wireless Sensors, as well as other 319.5MHz sensors (Interlogix format).
  • Adds up to 144 individual wireless zones (sensors/points) 
  • Operates from the 4 wire RS485 Data Bus 
  • Additional Receivers (up to 9) may be Connected to a single M1 or M1EZ8 Control for redundancy or greater coverage 
  • Flash Memory for Updating of operating Firmware 
  • Sensitivity: >105 dbm 
  • Operating Temperature: 0 to +120 degrees F 
  • Operating Voltage: 12 Volts D.C. 
  • Current Draw: 70mA 
  • Range: 300 to 500 ft. line of sight 

NOTE: Walls or metal may reduce actual operating range.
Item#:
M1XRFEG
You must be logged in to order this item. Log in here

Surface-Mount Outdoor Illuminated Stand-Alone Keypad

  • 1,100 Users over 2 Outputs. Codes may be 4~8 digits: - Output #1  Form C relay, 1A@30VDC, 1,000 users - Output #2  Form C relay, 1A@30VDC, 100 users
  • Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
  • Super user code gives admin access to keypad
  • Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
  • Programmable egress input with optional warning alarm and delayed egress
  • Real-time clock to auto-disable access at specific times
  • Up to 50 (01~50) duress codes for output #1 and 10 (01~10) for output #2
  • Duress code signals a silent alarm if an authorized user is forced to open the door under duress
  • 12~24 VDC/VAC Auto-adjusting operation
  • All features are programmed directly from the keypad: No need for an external programmer
  • IP66 Weatherproof Rating
  • Mounts to a standard single-gang back box (surface-mount back box included)
  • Durable and attractive stainless steel faceplate
  • Tamper output: N.C. Dry contact, 50mA@24VDC max.
  • Keypad illuminates when a button is pressed; backlight can be programmed for FULL, AUTO, or OFF in standby mode
  • Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time
  • Door sensor input for anti-tailgating operation
  • Door-propped-open warning
  • Door-forced-open warning
  • EEPROM Memory protects programmed information in case of power loss

Item#:
SK-1123-SDQ
You must be logged in to order this item. Log in here
|◀ ◀ 37 - 41 of 41 ▶ ▶|
View:
(Denotes required field.)