|◀ ◀ 85 - 96 of 23720 ▶ ▶|
View:

Passive UHF Hangtag, tres generic logo

Item#:
ANCTRES-900-HT600-G
You must be logged in to order this item. Log in here

ACT-34C, Custom Block Coded Me gaCode Transmitter

Item#:
ACT-34C
You must be logged in to order this item. Log in here

Mortise Cylinder for MK Series - Keyed Alike

Item#:
MKC-KA
You must be logged in to order this item. Log in here

AC-425IP installed in ME-1015 with Type B plug power cable

  • Full online and offline operation
  • Supports for 30,000 active credentials, 30,000 PIN codes, 128 access groups, 128 access areas, 128 time zones, 64 holidays and 32 NG Smart Links for automation
  • 20,000 nonvolatile, FIFO, records the event log while offline
  • Expandable with MD-IO84B I/O expansion for additional 8 inputs, 4 outputs OR the MD-D02B 2-Reader expansion for additional 2 readers with 4 inputs, 4 outputs
  • Real-time clock with super-cap holds power and keeps RTC real-time clock for up to 2 weeks when total power loss (no batteries to replace)
  • Supports wide range of Wiegand reader formats, PIN keypad formats, and logic options to support wide range of locks, deadbolts, electric strikes, maglocks, and sliding doors
Item#:
AC-425IP-BU
You must be logged in to order this item. Log in here

Access Power Distribution Module w/ Power Supply/Charger

AL300ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.

Input

  • Input 115VAC / 60Hz, 3.5A.
  • Input fuse rated @ 3.5A/250V.
  • Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C.supervised trigger input and polarity reversal trigger input.
Output
  • 12VDC or 24VDC selectable outputs.
  • 2.5A supply current.
  • Five (5) (auto-resettable) PTC protected outputs, rated @ 2A.
  • Output relay energizes when unit is triggered (form "C" contact rated 1A @ 28VDC).
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.

Item#:
AL300ULM
You must be logged in to order this item. Log in here

2-Door Web Access Controller

Item#:
C-2PA LUM102
You must be logged in to order this item. Log in here

MORTISE CYL KEYSW SG/SS NON IL LUM -DPDT MOM SW

Item#:
MCK-4-3
You must be logged in to order this item. Log in here

8310. F8315 Armature Holder x 28

Item#:
AH10 X 28
You must be logged in to order this item. Log in here

DIN Rail Enclosure 2 x 2 -mount metal cabinet for insta

Item#:
EN-DIN-22
You must be logged in to order this item. Log in here

Dual-purpose system

Item#:
CW-SYS
You must be logged in to order this item. Log in here

Magnetic Door Holder - Flush-Mount, UL

The UL Listed SECO-LARM Magnetic Door Holders are designed for virtually any remote door release applications, whether residential or commercial. Fail-safe operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.
  • For use with door closers to control the release and closing of residential, commercial, and public area doors
  • Adjustable armature plate reduces installation time and adjusts to door alignment changes
  • Low profile design
  • Holding force – 33-lb (15kg)
  • 3 voltages: 12/24 VAC/VDC, and 120VAC
  • Cast aluminum faceplate
  • No residual magnetism for easy release
  • Built-in voltage spike suppressor
  • Use with SECO-LARM door closers
  • Optional extension bars available: 1/2", 3/4", 1", 2", 3", 4", 5", 6", 7" (13mm, 19mm, 25mm, 50mm, 76mm, 102mm, 127mm, 152mm, 178mm)
Item#:
DH-171SQ
You must be logged in to order this item. Log in here

Gate Lock, 12/24VDC, Fail Locked Monitored

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

  • 2,000 lbs holding force
  • Operates under preload up to 100lbs
  • Automatic dual voltage - no field adjustment required
  • Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
  • Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
  • Tamper resistant cast housing
  • Optional latch status monitor
  • Surface mount
  • MagnaCare lifetime replacement, no fault warranty

Item#:
GL1-FLM
You must be logged in to order this item. Log in here
|◀ ◀ 85 - 96 of 23720 ▶ ▶|
View:
(Denotes required field.)