|◀ ◀ 37 - 48 of 23616 ▶ ▶|
View:

Reader with card,pin,QR & bluetooth

Item#:
VG10CKQ-M
You must be logged in to order this item. Log in here

Red Keypad Reader High Securit y + Prox + Mobile

Item#:
RKPB
You must be logged in to order this item. Log in here

Red Single-Gang Reader High Se curity + Prox + Mobile

Item#:
RGPBV2
You must be logged in to order this item. Log in here

Waterproof Wiegand Reader - EM+HID SINGLE GANG

  • Water Resistance: IP66
  • Output Format: Wiegand 26 ~ 37 bits output (default: 26 bits)
  • Card Type: 125KHz EM andHID card
  • Reading Range: 7cm
  • Frequency: 125KHz
  • Standby Current: < 25mA
  • Operating Voltage: 9 ~ 24VDC
  • Operating Temperature: -40°C ~ 60°C (-40°F ~ 140°F)
  • Operating Humidity: 10% ~ 95% RH
  • Dimensions: 4.75" (L) x 3" (W) x 0.88" (D)
  • Limited Lifetime Warranty
Item#:
PEAKS4-R
You must be logged in to order this item. Log in here

Supports Farpointe + certain H ID and AWID 125-kHz Proximit

Item#:
P-640-H-A
You must be logged in to order this item. Log in here

Mullion Reader

  • RFID Proximity 26- to 37-bit Wiegand-based 125 KHz pass-through of bit length
  • Output converts to Wiegand formats
  • Voltage: 5VDC at the reader. Regulated power supply is recommended for best operation.
  • Electronics potted and sealed with tamper-resistant epoxy for indoor installation
  • FCC, RoHS, and UL Standard 294 compliant
  • IP65* moisture and dust protection (IP rated as “dust tight” and protected against water projected from a nozzle.)
  • 5 KHz audio buzzer
Item#:
RDRM
You must be logged in to order this item. Log in here

tSec 13.56MHz/125kHz/BT Reader Wall Switch Black

Item#:
PRX-TSEC-EXTRA-BT-B
You must be logged in to order this item. Log in here

Indoor / Outdooer Surface-Mount Weather Resistant Keypad

The sealed environment 232SE style keypad features a brushed metal housing that has been treated to resist corrosion and an all metal Braille, alpha-numeric keypad. There is an internal sounder that is used to indicate key press feedback, and a bi-color LED to indicate operation. The housing has been designed to mount directly on a standard single-gang electrical box, or to most flat surfaces.

Features

  • 125 users
  • Heavy chrome plated trim ring
  • Flush mount
  • Fits single-gang electrical box
  • Touch sensitive solid-state flat keys
  • Bi-color LED to indicate operation
  • Indoor/outdoor
  • Internal sounder
  • Functionality mode: 232


Specifications
  • Current draw: 108 mA maximum (add 30 mA for each additional relay)
  • Operation voltage: 12-24 VAC/VDC  auto adjusting
  • Dimensions: 3.00 in. W x 4.50 in. H x 1.55 in. D
  • Temperature tolerance: -20F to 130F
  • Order number: 0-232140
Item#:
232SE
You must be logged in to order this item. Log in here

Red Single-Gang Reader High Se curity + Prox + Mobile

Item#:
RGPB*
You must be logged in to order this item. Log in here

Rugged Reader - Single Gang Ke ypad

Item#:
RDRGRK
You must be logged in to order this item. Log in here

ioProx Reader, XSF, Single-Gang Size

Up to 20.5 cm (8 in) Read Range, Black

Item#:
P325XSF
You must be logged in to order this item. Log in here

GoControl Z-Wave Plus, Energy Monitoring Plug-in Dimmer Light Module

The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times).
  • Signal (Frequency): 908.42 MHz
  • Maximum Load:
  • Incandescent: 300W maximum, 120 VAC
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Network wide inclusion
  • One controlled and one pass-through outlet
  • Security beaming
Item#:
PD300EMZ5-1
You must be logged in to order this item. Log in here
|◀ ◀ 37 - 48 of 23616 ▶ ▶|
View:
(Denotes required field.)