|◀ ◀ 409 - 420 of 23697 ▶ ▶|
View:
This solenoid rim strike is a surface-mounted electric strike designed to work with Pullman style rim exit device latches. Designed to fit in tight situations where the exit device is mounted very close to the door frame, e.g. aluminum storefront applications.
  • Designed to fit in tight situations where the exit device is mounted very close to the door frame, e.g. aluminum storefront applications. 
  • For maximum latch engagement, the strike keeper has been designed to pivot out of the strike body versus rolling out of the strike. 
  • Accommodates 1/2“ to 3/4“ (13 mm–19 mm) latch projection. 
  • Horizontal adjustment ensures proper latch positioning to compensate for door misalignment – up to 1/4“ (6.4 mm). 
  • Shim may be added to the strike cavity to engage with misaligned deadlatch. 
  • Lockdown holes for secure mount. 
  • Cooler operation – runs cool to the touch; no suppressor kit needed. 
  • High-grade stainless steel ensures superior strength and creates a sleek aesthetic. 
  • Non-handed. 
  • Plug-in wire connectors.
Item#:
0163 X 32D
You must be logged in to order this item. Log in here
  • Over 68 billion possible codes
  • LED transmission indicator only appears when buttons are pressed
  • Operates up to 500ft (150m)*
  • RF Anti-scan protection
  • FCC and IC Certified
  • 315MHz (433.92MHz available)
  • Compatible with all 315MHz SECO-LARM receivers
  • Slimline design: 1-1/4"x2-3/16"x5/16" (31.5x55x8 mm)
  • CODEBUMP™ codehopping models also available
  • Replacement batteries available: X-930-096 (CR2032)
  • Patented design
Item#:
SK-919T1-GBQ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Alternate action push button

  • 2 in. green square push button labeled "PUSH TO EXIT"
  • Swich mounted on single gang wallplate
  • Momentary action switch
  • SPDT timed contacts rated 2A @ 35VDC
  • Timer delay adjustable from 2 to 45 seconds
  • LED illuminated push button 12/24 VDC
  • 1/2 in. red LED operates on 12 or 24 VAC or VDC
  • Switch depth behind plate: 2-1/2 in.
  • UL 294 listed

Item#:
TS-2-2T
You must be logged in to order this item. Log in here

  • Vandal resistant 3/4 in. brass nickel plated push button
  • Labeled "EXIT"
  • Momentary action switch
  • D.P.D.T. contacts rated 10A @ 35VDC
  • Switch terminated with 10 in. leads
  • Switch mounted on single gang stainless steel wall plate
  • Switch depth 1-1/2 in. behind plate
  • UL 294 listed
Item#:
TS-23
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The 5000 series is a compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb. Its strength is derived from a unique keeper pin locking design, enabling the 5000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latchbolts up to 5/8 in. throw.

Features

  • Tamper resistant
  • Static strength 1,500 lbs.
  • Dynamic strength 70 ft-lbs.
  • Endurance 500,000 cycles
  • Field selectable fail secure/ fail safe
  • Dual voltage 12 or 24 VDC/VAC
  • Non-handed
  • Internally mounted solenoid
  • Accommodates 1/2 - 5/8 inch latchbolt (5/8 in. with 1/8 in. door gap)
  • Strike body depth 1-1/16 in.
  • Plug-in connector
  • Trim enhancer included
  • Five year limited warranty

Item#:
10190401
You must be logged in to order this item. Log in here
Item#:
PROX CARD THINW/SLOT
You must be logged in to order this item. Log in here
Item#:
1600-CS-630-LM
You must be logged in to order this item. Log in here
|◀ ◀ 409 - 420 of 23697 ▶ ▶|
View:
(Denotes required field.)