|◀ ◀ 373 - 384 of 23827 ▶ ▶|
View:
The REX sensor is specifically designed for indoor Request-To-Exit applications and features a passive infrared sensor with qualified motion analysis. The sensitivity of the REX sensor can be easily adjusted for long or short range applications and features an adjustable time delay. Because of its sleek design, the REX sensor is easily mounted to any frame, header wall, or ceiling.
Item#:
REXM
You must be logged in to order this item. Log in here

  • Narrow 1-3/4 in. stainless steel wall plate
  • 5/8 in. x 7/8 in. green rectangular push button
  • Labeled "PUSH TO EXIT"
  • Switch illuminated with hi-brightness LED, operates on 12 or 24 volts AC/DC
  • Momentary action switch
  • D.P.D.T. contacts rated 3A @ 35VDC or 120VAC
  • Temperature range -25C to 70C
  • 1-1/4 in. switch depth behind plate
  • Other switch cap colors available
  • Custom legends can be provided
  • UL 294 listed

Item#:
TS-9
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
This item has been discontinued and replaced by item 
Item#:
10190403
You must be logged in to order this item. Log in here

Alternate action push button

  • S.P.D.T. contacts rated 4 Amps @ 28VDC
  • Push button protected with 1" guard ring
  • Switch terminated with colored leads

Item#:
TS-20
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The NETCOM2 is an off-board TCP/IP communication module designed to establish access control units as a network-appliance based unit. The Keyscan NETCOM2 functions with new and legacy access control units and allows a quick connection to an existing LAN/WAN network infrastructure. NETCOM2 features DIP switches for convenient set up and is programmable for easy conguration when establishing communication along a network infrastructure.

Features

  • Features embedded IP addresses for programming the device on a local network
  • Provides serial connection from the ACUs via 10/100 RJ45 network interface to communicate with a server or PC host
  • Use static TCP/IP addresses to allow communication over an existing LAN/WAN network
  • Unlimited units can be added to a system, oering an enterprise solution
  • Fast, easy, trouble-free o-board installation
  • Allows one or more Access Control Unit(s) to communicate on a LAN/WAN
  • DIP switch settings for convenient conguration
  • Fast and easy installation for each ACU
  • Static TCP/IP communication protocol between PC NIC (Network Interface Card) and Access Control Unit(s) featuring NETCOM2
  • Requires Static IP addresses for proper operation
  • Simplies both installation and maintenance procedures

Item#:
NETCOM2
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ ◀ 373 - 384 of 23827 ▶ ▶|
View:
(Denotes required field.)