|◀ 337 - 348 of 23730 ▶|
View:

  • Simplest and most economical solution for power transfer
  • 18 inch cord is standard with Touch Sense Bar and Touch Sense Handle but may also be purchased separately
  • Consists of an 18 inch [460mm] or 36 inch [920mm] armored stainless steel cable and plastic end pieces in light gray and black
  • Cable has an interior diameter of .25 inch [6mm]
  • Supports interior wire cables up to .2 inch [5mm] thick

Item#:
TSB-C
You must be logged in to order this item. Log in here

Features

  • Zone of detection easily adjustable with pinpoint accuracy
  • X-Y Targeting targets a specific area of detection
  • Unlocks or shunts door automatically
  • Hands-free, no buttons to push
  • Integrated 90 dB local door alarm sounder independently controlled by access panel
  • Infrared detection coupled with DSP prevents false Door Forced Open alarms
  • 4 models available

Item#:
T.REX-LT2-NL
You must be logged in to order this item. Log in here
  • Pneumatic push button
  • Offers over 300 combinations in one kit
  • Pneumatic adjustable timer opens or closes a circuit and has a timed delay before reset
  • Pneumatic timer range: 2-60 seconds (± 15%). Repeat accuracy is ± 10%
  • Power not required for timing operation
  • Form “Z” contacts, one N.O., one N.C.
  • Switch rating 10 amp. (resistive) 240 VAC
  • Faceplate constructed of cast aluminum
  • ADA Compliant
Item#:
UB-1PN
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Surface mount installation
  • Power requirements: 12/24VDC
  • Current Draw: 500mA @ 12VDC, 250mA @ 24VDC
  • Monitoring sensor
  • Visual feedback (red & green)
  • Dimensions: 10 X 1.7 X 1 in. (250 x 42.5 x 26mm)

Item#:
SM300
You must be logged in to order this item. Log in here

Trove1C1 accommodate various combinations of CDVI boards with or without Altronix power supplies and accessories for access systems.

Trove1 enclosure with TC1 Altronix/CDVI backplane
Backplane accommodates a combination of CDVI Atrium controllers with or without Altronix accessories:

  • CDVI Atrium A22
  • Altronix Power Supplies
  • Altronix Sub-Assemblies
  • Includes Altronix Trove1 Enclosure and one (1) removable TC1 backplane
Trove1 Enclosure
  • 16 AWG grey enclosure with a single 1.5 in. center knockout on the top of the enclosure plus (9) 2-Stage knockouts for 0.75 or 1 in. conduit.
  • Includes: One (1) cam lock, one (1) tamper switch and mounting hardware.

Item#:
TROVE1C1
You must be logged in to order this item. Log in here

  • Narrow 1-3/4 in. stainless steel wall plate
  • 5/8 in. x 7/8 in. green rectangular push button
  • Labeled "PUSH TO EXIT"
  • Switch illuminated with hi-brightness LED, operates on 12 or 24 volts AC/DC
  • Momentary action switch
  • D.P.D.T. contacts rated 3A @ 35VDC or 120VAC
  • Temperature range -25C to 70C
  • 1-1/4 in. switch depth behind plate
  • Other switch cap colors available
  • Custom legends can be provided
  • UL 294 listed

Item#:
TS-9
You must be logged in to order this item. Log in here
This item has been discontinued and replaced by item 
Item#:
10190403
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Alternate action push button

  • S.P.D.T. contacts rated 4 Amps @ 28VDC
  • Push button protected with 1" guard ring
  • Switch terminated with colored leads

Item#:
TS-20
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 337 - 348 of 23730 ▶|
View:
(Denotes required field.)