|◀ ◀ 25 - 36 of 1036 ▶ ▶|
View:

StarLink 100' Extended Remote Antenna Kit

Extended Remote Antenna Kit for use with cellular fire communicators, suitable for outdoor or indoor applications. Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 100' LMR 400 Coax Type N male to SMA male terminated cable, one (1) SMA female to TNC male adapter for use with competitive communicators. Also includes SLE-ANTEXT-ISO Commercial Fire Ground Fault Isolation Plate.
Item#:
SLE-ANTEXT100
You must be logged in to order this item. Log in here

IQ Panel 2 Battery

The IQ Battery is the factory replacement battery for the IQ Panel 2 and 2 Plus.
  • 3.7V
  • 3200mAh
  • 11.8 Wh
  • For use with the IQ Panel 2 and 2 Plus
Item#:
QR0041-840
You must be logged in to order this item. Log in here

WSS 2000 In/Outdoor Detector/Transmitter

The TD-20U is the battery-powered sensor transmitter for the RCTD-20U (Wireless 2000). The detection pattern is selectable, allowing for a 17 foot fan pattern or 50 foot beam pattern, and sends a signal back to the RC-20U chime box when compromised. The device is powered by a standard 9V battery (not included), and up to nine TD-20U's can be added to one RC-20U receiver.
***Products are backwards compatible and will work with the RC-10U

  • Series***

    Features:
    • Operates on a 9V lithium or alkaline battery
    • Choose 50ft. Long Range or 17ft. Fan (Wide) detection pattern
    • Weather proof housing (IP54 rating) for both indoor and outdoor use
    • Uses passive infrared to detect motion and send RF signals to receivers
    • 2000ft. transmission range (line of sight)

    • Item#:
    TD-20U
    You must be logged in to order this item. Log in here

    VHB Tape NanoMax Sensors

    Item#:
    RE042
    You must be logged in to order this item. Log in here

    StarLink 50' Extended Remote Antenna Kit

    Remote Antenna Kit, Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 50' LMR 300 Coax Type N male to SMA male terminated cable. Also includes one (1) SMA female to TNC male adapter for use with competitive communicators

    Item#:
    SLE-ANTEXT50
    You must be logged in to order this item. Log in here

    SENSOR, TEMP 0 DEG C/32 DEG F MQT8K 0KY(BAR) A

    Item#:
    T8000
    You must be logged in to order this item. Log in here

    Antenna, LTE, MMCX, 2.5m cable (BAT-CONNECT-V, BAT-CONNECT-

    Item#:
    RE036
    You must be logged in to order this item. Log in here

    Polycarbonate Enclosure w/Open Conduit Bkbx, Surface Mt Apps

    Item#:
    STI-7511D
    You must be logged in to order this item. Log in here

    Desktop Kit Go!Control CP-Desk

    Features:

    • Allows panel to sit at two different viewing angles
    • Sleek form factor
    • Bumper pads to protect furniture and prevent sliding
    • Works with any GC2 or GC3 panel

    Item#:
    2GIG-CP-DESK
    You must be logged in to order this item. Log in here

    Desktop Kit Go!Control TSI-DESK

    Features:

    • Allows keypad to sit at two different viewing angles
    • Sleek form factor
    • Bumper pads to protect furniture and prevent sliding
    • Works with any TS1 keypad

    Item#:
    2GIG-TS1-DESK
    You must be logged in to order this item. Log in here

    Computer Interface for Recordables

    The ELK-129 Computer Sound Card Interface allows a computer's speaker output to be used as one of the tools for programming sounds into the ELK Recordable Modules, such as the ELK-120 or ELK-124. Includes software to download your compute's audio files (WAVs) to the Recordable Modules.
    Includes:

    • ELK-129 Sound Card Interface
    • 5 pin Ribbon Cable
    • 6ft. Audio Cable
    • CD with WaveLoader Software
    Features:
    • Powers ELK-120 or ELK-124 Modules during Programming.
    • Power Switch.
    • Audio Jacks for Computer and Speakers.
    • Plug-In Cable for Quick Connections to Recordable Modules.
    • Includes 6 foot Shielded Cable for Speakers.
    • Compact Plastic Case.
    • Programs Recordable Modules in Seconds!
    Specifications:
    • Size: 4.4in. x 3in. x 1.15in. (111.8mm x 76.3mm x 29.2mm).
    • Supplies 12Volts D.C. @ 1 Amp for ELK-120 / 124 Modules.
    • Requires MS Windows 98 or higher, Stereo Speaker Output Jack or Sound Card and computer speakers.
    • Requires (1) 12V, 20VA AC Transformer (not included) to program the ELK-120 or ELK-124.
    • Lifetime Limited Warranty.
    Item#:
    129
    You must be logged in to order this item. Log in here

    SENSOR, TEMP 5 DEG C/41 DEG F MQT8K 4KY (BAR) AW/ST 3C

    Item#:
    T8005
    You must be logged in to order this item. Log in here
    |◀ ◀ 25 - 36 of 1036 ▶ ▶|
    View:
    (Denotes required field.)