Home  >  INTRUSION  > (x)
|◀ ◀ 3697 - 3708 of 8452 ▶ ▶|
View:

SW SET, MOLDED 80 CASE SPST-NC

Item#:
130T-12-W
You must be logged in to order this item. Log in here

Vault Sound Alarm System

Item#:
2000076
You must be logged in to order this item. Log in here

SW SET, 29PD (DPDT) W/SW & MAG

Item#:
229PD
You must be logged in to order this item. Log in here

SW, 3/8" PRESS FIT SPST-NC WHT

Item#:
S3030-12-W
You must be logged in to order this item. Log in here

SW SET, SURFACE MOUNT GRAY

Item#:
29CWG-G
You must be logged in to order this item. Log in here

SW SET, 3/8" PRESS FIT SPST-NC

Item#:
3030-TWG-BL
You must be logged in to order this item. Log in here

SPACER, 400 SERIES BROWN

Item#:
S-15-B
You must be logged in to order this item. Log in here

Supervised Remote Power Supply

The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can report abnormal conditions back to an ELKM1 Control over the RS485 four (4) wire data bus. It also features relay outputs for AC and Low Battery to allow "stand-alone" operation with other Controls (Security, Access, CCTV products, etc.). Power from the P212S can be used to increase the capacity of a control, or to remotely power devices such as motion detectors, keypads, zone expanders, sirens, annunciators, etc.
  • Regulated 12VDC Output with up to 2 Amps of current 
  • Energy Efficient ESMT - Elk Switch Mode Technology ensures low idle power with maximum output headroom 
  • Automatic output over-current protection (PTC) 
  • Master AC and Battery ON / OFF Power Switch 
  • Visual AC Power Indicator 
  • Innovative EBT - Elk Battery Technology circuit provides maximum battery life
    • Controlled charge ramp and maintenance algorithm
    • Low Battery cut-off protects battery from deep discharge 
  • M1 Control allows:
    • Remote power reset of powered peripherals
    • Data-bus supervision of AC and Battery status 
  • Stand-alone flexibility:
    • Two (2) sets of DC outputs
    • One (1) on-board relay to supervise battery status
    • One (1) on-board relay to supervise AC status
  • AC Input: 16.5VAC, 45VA (ELK-TRG1640 or equiv.) 
  • DC Output Voltage: 13.8 Volts D.C. +/- 5% 
  • Current Rating: 2.0 Amps 
  • Wattage: 30 Watts 
  • DC Output Protection: Auto Resetting PTC 
  • Rechargeable Battery Size: Max. 12 Ah 
  • Low Battery Cutoff Threshold: ~10 Volts. 
  • Load Regulation: + / - 2%
Item#:
P212S
You must be logged in to order this item. Log in here

Universal Wireless to Wireless Translator AND Repeater, Commercial

  • Selectable wireless panel and sensor compatibility
  • Translator or repeater operation
  • Rechargeable backup battery
  • Cover tamper
  • Certified to UL1023, ULC1023, UL1610, and ULC S304
Item#:
RE524XC
You must be logged in to order this item. Log in here

SW SET, SPST-NO 1" GAP

Item#:
120T-12WG-G
You must be logged in to order this item. Log in here

100' Outdoor Hybrid Battery-Po wered Photoelectric Detector -

100' Outdoor/ 200' Indoor Hybrid Battery-Powered Photoelectric Detector - RX Harwired, TX Battery powered (PCU-5 and 2 Batteries Included)
  • Great flexibility with power options: Hybrid or wireless options available.
  • Simplified battery replacement: Batteries can be accessed easily without touching the main unit, eliminating the need to re-align the beams.
  • IR communication for low battery signal: Infrared communication between the transmitter and the receiver which signals when the battery status is low.
  • Innovative mechanical design: Sniper viewfinder with 2x magnification, anti-frost main unit cover, aspherical optical lens, weather protection, and wireless transmitter storage space.
Item#:
SL-100TNR
You must be logged in to order this item. Log in here

SW SET, MOLD 80 CASE W/MM-600

Item#:
N120T-12WG-G
You must be logged in to order this item. Log in here
|◀ ◀ 3697 - 3708 of 8452 ▶ ▶|
View:
(Denotes required field.)