The SL-401 is the lowest current consumption, weather-proof strobe in its class. It operates on 12V DC and draws a low 115mA. It is made of high impact resistant thermoplastic to stand up to abuse. The strobe is rated at 60,000 candle power and is designed with an operating life in excess of 200 hours of continuous operation.

Features:

• Easy 2-wire connection with reverse polarity protection
• 60,000 candle power output
• 115mA current draw at 12V DC
• Two colored lead wires AWG#22 provided for input power connection
• Operating life in excess of 200 hours

The MultiMag series of electromagnetic locks are designed for easy installation and multi-purpose operation for interior or perimeter doors. The mounting bracket has keyhole mounting to support the magnet, freeing the installer's hands to affix the magnet mounting screws. The removable cavity cover offers quick, easy access to wiring. The RCI 8310 MultiMag® applies to single outswinging doors, while the RCI 8320 MultiMag® is for double outswinging doors. For additional security monitoring these electromagnetic locks offer optional door status & security condition sensors.

• Energy: 230mA Auto-Sensing 12-24VDC (Max at 12VDC for 8310, 460mA for 8320)
• Strength: Up to 1,200lbf Holding Force (Each Electromagnet)
• Warranty: Lifetime Limited Warranty
• Mode: Fail-Safe
• Fire-Rated: CAN/ULC S104 UL 10C 1-1/2-Hours
• Monitoring: Optional Door Status Sensor (DSS)/ Security Condition Sensor (SCS) Available

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings. The ELK-950 is compact and easy to install and features high quality, clearly labeled screw terminals, 8 pin modular phone connector, built-in tamper loop, and automatic shorting pins for cord removal.

• Superior Solid State Surge Suppression
• Rapid Response Time
• Protects Incoming Telephone Line
• Protects AC Input from Transformer
• Clamps Line-To-Line & Line-To-Ground
• Self-restoring After Surges Within Ratings
• RJ31/38X 8-Pin Modular Jacks
• Convenient Test points for Lineman's Test set
• Surface Mount Enclosure
• Screw Terminals Provided For Telco In-Out & AC Power
• Lifetime Limited Warranty
• Response Time: Less than 1 Nanosecond
• Breakover Voltage: 300 Volts on Telephone Line, 50 Volts on AC line
• Peak Pulse Current: 100 Amps
• Max AC Input Voltage: 24VAC
• Ground Wire: 24" - 14 Gauge Stranded
• FCC Reg. No. 5K6USA-23140-XP-N Ren No. 0.0B
• Size: 4.4" x 3" x 1.15"

SLC loop:

• Low standby current
• Compatible with 400 Series product
• Two visible LEDs blink in standby and provide a 360° field viewing angle
• Detector head plugs easily into base
• Built-in test switch
• Wide variety of mounting bases with built-in shorting spring

The HUSD-15B Series is a Form C (SPDT), dual button hold-up switch that is designed to generate an alarm condition only when both buttons are pressed simultaneously, thus preventing accidental triggering.

• Dual button activation to eliminate accidental triggering
• SPDT transfer contact for supervised loop
• Terminal strip with three wire terminals
• Tamper protected switch mechanism using UL listed microswitch
• Concealed mounting screw
• Status window indicator
• White plastic case housing
• HUSD-15BL latching button,tool reset (included)