S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The C2G Select VGA Video Cable is perfect for source to display connectivity for in-home desktop or in-wall commercial applications which require video resolutions of up to QXGA (2048x1536). The CMG rated jacket provides a solution for in-wall applications, while the low-profile, rounded connectors make installing in tight spaces, such as a projector mount pole, easy. This cable is designed to support high resolution video applications over long distances of up to 150ft. All 15 pins are wired providing support for DDC2 (E-DDC) and Extended Display Identification Data (EDID) signals, i.e. communication of the display's capabilities, ensuring that the content from the source is sent at the optimal resolution for the display.
- In-wall, CMG-rated jacket
- Supports up to a 2048x1536 resolution
- All 15 pins wired to support DDC2 (E-DDC) and EDID
- Low profile connectors
Item#:
CTG50217
You must be logged in to order this item.
Log in here
Power Distribution to 9 Devices (250mA ea)
This item has been discontinued and replaced by item
PD9HC
These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a single Master Power On/Off Switch. The modules accept a 6 to 30 Volt A.C. or D.C. power source (not included) which connects either to the input terminal block or the 2.1mm D.C. power jack located on the module. Two or more outputs can be paralleled for additional current.
- Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
- Master Power On/Off Switch.
- Visual LED Power Indicators on each Output.
- Convenient Test Points for measuring Total Current Draw.
- Lifetime Limited Warranty.
- Paintable White Plastic
- Max Current Draw: 250mA from each output.
- Max Combined Current Draw: Not to exceed Input Power Source
- Input/Output Voltage: 6 to 30 Volts AC or DC
- Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack
- Output Connection: Screw terminals (POS and NEG) for each output
- Enclosure Size: 6.5" x 4.3" x 2"
Item#:
PD9
You must be logged in to order this item.
Log in here
Item#:
RP-44
You must be logged in to order this item.
Log in here
The ELK-73 is a 20 Watt, 8 Ohm Speaker mounted in an attractive surface mount plastic enclosure. This versatile Echo Series speaker is designed to be heard but not seen! Sound "echoes" off mounting surface from back plate edge.
This unique contemporary speaker has a smooth, paintable, "no grill" surface that easily blends with any decor. This speaker mounts to any flat surface or single gang
electrical "J" box.
- Pre-Wired for easy Installation
- May be Painted or Wallpapered
- Mounting Hardware Included
- Impedance: 8 Ohms
- Rating: 20 Watts Nominal
- Frequency Response: 500 to 7000 Hz
- Size: 4.56" H x 4.3" W x 1.875" D
Item#:
73
You must be logged in to order this item.
Log in here
The ELK-912 is a high quality 12 Volt D.C. relay with SPDT (Form "C") dry contacts. It features low current draw, positive or negative activation, and is ideal for general purpose switching of devices or high current loads. Also available in a 12 pack (ELK-912-12) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.
- Low Current Draw.
- Positive Or Negative Activation.
- Form "C" Dry Contacts.
- Elevator Style Screw Terminals.
- Great For General Purpose Switching .
- Small, Compact Size.
- Double Sided Foam Tape Provided For Mounting.
- Packaged in Reusable Poly Storage Box.
- Lifetime Limited Warranty.
Item#:
91212
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)