|◀ ◀ 61 - 66 of 66 ▶ ▶|
View:

SP40S SUPERVISED AUDIO POWER B OOSTER,160W,BLK

Item#:
SPB-160-B
You must be logged in to order this item. Log in here

POWER SUPPLY BOARD,SPB160 OR S PB 80/4

Item#:
SPBPS-X
You must be logged in to order this item. Log in here

6 AMP 120VAC REMOTE CHARGER POWER SUPPLY W/ METAL ENCLOSURE

This item has been discontinued and replaced by item 
The PS Series is a remote power supply line from Silent Knight and is a direct replacement
for the 5495/5499. The SK-PS6 is a 6 amp and the SK-PS10 is a 10 amp, remote power
supply with battery charger that may be connected to any 12 or 24 volt fire alarm control
panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power
for NACs (notification appliance circuits) configured as either Class B or Class A (requires
the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides
auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and
other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH
batteries and can charge up to 33 AH batteries in a separate cabinet.
Item#:
SK-PS6
You must be logged in to order this item. Log in here

6 AM 24VDC Red Power Supply PS6

  • Cost Effective
  • Filtered and Electronically Regulated Output
  • AC Fail Supervision (Form C), Low Battery Supervision (Form C) and Battery Supervision (Form C)
  • Built In Charger for Sealed Lead Acid or Gel Type Batteries
  • Accommodates (2) 12VDC/7AH batteries
Item#:
0500-02340
You must be logged in to order this item. Log in here

6A Distributed Power Module

This item has been discontinued and replaced by item 

The 5495 is a 6A notification power expander that provides its own AC power connection, battery charging circuit and backup battery for use with fire alarm control panels. The 5495 has a switch mode power supply design that is up to 50% more efficient than competitive linear mode power supplies.

Features

  • UL listed for 6 amps of notification power
  • Power supplys advanced switch mode design reduces damaging heat and manages power up to 50% more efficiently than other systems
  • Dip switches allow for easy configuration
  • 24VDC regulated outputs
  • Four power-limited notification appliance circuits rated at 3 amps each: 4 Class B, 2 Class A or 1 Class A and 2 Class B
  • Additional continuous auxiliary output2 inputs
  • Independent trouble relay
  • Built-in synchronization for appliances from System Sensor®, Gentex®, Wheelock®, AMSECO® and Faraday
Item#:
005495
You must be logged in to order this item. Log in here

POWER SUPPLY - REGULATOR WALL ADAPTER 24VDC 2A W/ CABLE

Item#:
5270752
You must be logged in to order this item. Log in here
|◀ ◀ 61 - 66 of 66 ▶ ▶|
View:
(Denotes required field.)