S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
Actions- Built-in reed switch and piezo shock sensor
- Adjustable sensitivity and range of shock sensor
- Long range and battery life
- Transmits open/close, tamper, low battery, and supervisory signals
- Uses easy to find CR2032 batteries
- RF frequency: 319.5 MHz
- Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Operating Temp Range: 32 to 120°F (0 to 49°C)
- Dimensions: 2.25" L x .1.0 x 0.50" in. (L x W x D)
The DS1102i Detector Series uses microprocessorbased sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1102i and DS1102iCHI can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The square detectors mount on ceilings or walls.
Features:
- FlexCore™ Signal Processor - The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
- Easy Installation and Setup - Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG1625RFM recesses in a 1.0" (26mm) diameter hole through a false ceiling or sheetrock. A hand-clap feature verifies that the detector is functioning.
- Selectable Sensitivity - Two DIP switches on the FG1625RFM make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG701 Glassbreak Simulator.
- Mount the Detector Anywhere - Flush mounts in any wall, or in the ceiling, with no minimum range and a maximum range of 25' (7.6 m) to the glass.
- Covers All Glass Types - The FG1625RFM works on all glass types, including plate, tempered, laminated, wired, filmcoated, and sealed insulating glass.
- Multiple Domain Signal Analysis - The FG1625RFM performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.
- Patented Remote Test Mode - The Patented Remote Test Mode can enable or disable the indicator LEDs using the FG701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes.
- Mounting Locations - The FG1625RFM can be flush mounted in the ceiling, opposite wall, adjoining wall, or the same wall as the glass through a 1" diameter hole.
The Inovonics glassbreak detector transmitter utilizes GE Interlogixs ShatterPro II Pattern Recognition Technology for proven performance, extended range and increased immunity to false alarms. This technology also provides extended range and an automatic test feature. The glassbreak detector transmitter is self-monitoring, alerting users when maintenance is needed.
Features: